XLR jack JINJIA XLR-18-2-N3GR with no surface defects ensuring durability in electronic applications
Manufacturer:
JINJIA
Description:
Through Hole Circular Connector Assemblies RoHS
Category:
Circular Connector Assemblies/Circular Connector Assemblies
Specifications
Mfr. Part #:
XLR-18-2-N3GR
Package:
Through Hole
Model Number:
XLR-18-2-N3GR
Introduction
XLR Jack Specification
This specification applies to XLR jacks used in electronic products. It details the electrical, mechanical, durability, and environmental performance characteristics of the product.
Product Attributes
- Brand: Shenzhen Jinjiarun Electronic Technology Co., Ltd
- Origin: China
- Document Number: JJR-WI-47
- Issue Date: 2008-09-10
- Version: A1
Technical Specifications
| Section | Item | Property | Test Condition | Performance |
|---|---|---|---|---|
| 2. Rated / | Practical temperature range | -30 to +80 | - | - |
| Humidity range | 85% RH.MAX. | - | - | |
| 2. Rated / | Preservation temperature range | -10 to +40 | - | - |
| Humidity range | 85% RH.MAX. | - | - | |
| Storage Period | Not Exceed 180 Days (in non-corrosive air) | - | - | |
| 2. Rated / | Rated voltage and current (MAX.) | 50V AC, 6A | - | - |
| 2. Rated / | Appearance | No scratches, soil, rust or discoloration on the surface. | - | - |
| 3. Construction / | Outline And Dimension | Should match the attachment drawing. | - | - |
| 3. Construction / | Part And Material | Should be consistent with the material list specifications. | - | - |
| 4. Electrical efficiency / | Withstand Voltage | Withstand AC 1500V (50/60Hz RMS) between two non-contact terminals for 1 minute. No dielectric breakdown shall occur. | Between two non-contact terminals | No dielectric breakdown |
| Insulation Resistance | 10000 M Min. | Apply 500V DC between any contactless terminal and the other terminal for 1 minute 5 seconds. | 10000 M Min. | |
| 4. Electrical efficiency / | Contact Resistance | 30 m MAX. | Measure tail end of matched terminals (voltage max 20mV, current max 100mA). | 30 m MAX. |
| 5. Mechanical Performance / | Insertion and withdrawal forces | Insertion: 35 N max. Withdrawal: 2 N min. | Rate of insertion/withdrawal: 2 mm/s. Mating of complete connectors without latching device. | Insertion: 35 N max. Withdrawal: 2 N min. |
| Terminal Strength | No looseness, damage, etc. (deformation acceptable). | Withstand a force of 0.5 kgf for 10 seconds. | No looseness, damage | |
| 6. Durability / | Life test | Contact resistance: less than 50 m. | No load, rotate and plug/unplug with matching plug for 1000 times (frequency 5 times/min). | Appearance no obvious change, destruction. Contact resistance < 50 m. |
| 7. Solderability / | Resistance to soldering heat | Plastic base should not be deformed and terminals should not fall off. | Dip in solder at 2603 for 51 seconds. | No deformation, no terminal detachment |
| Solderability | Coating of solder area should be more than 95%. | Solder temperature: 2453C. Time of dip: 30.5 seconds. | Solder area > 95% | |
| 8. Environment test / | Cold test | Appearance no obvious change. Contact resistance: 50 m max. Insulation resistance: 500 M min. Withstand voltage: AC 1000V. | Place at -30 3 C for 96 hours, then 1 hour under standard conditions. | Appearance OK, CR<50m, IR>500M, WV:AC 1000V |
| Heat test | - | Store at 802 for 96 hours, then 1 hour under standard conditions. | - | |
| Humidity test | Appearance no obvious change. Contact resistance: 50m max. Insulation resistance: 500 M min. Withstand voltage: AC 1000V. | Store at 403, 90%~95% RH for 96 h, then 1 hour under standard conditions. | Appearance OK, CR<50m, IR>500M, WV:AC 1000V | |
| Salt spray test | No obvious rust in the appearance. | Temperature: 35 2. Solution: 5 1%. Spray time: 24 hours. Wash and dry at room temperature after experiment. | No obvious rust | |
| 9. Test condition / | Standard Test Conditions | Temperature: 15C to 35C, RH: 25% to 85%, Pressure: 86 kPa to 106 kPa. (Specific conditions for doubt resolution: 201C, 63% to 67% RH, 86 kPa to 106 kPa) | - | - |
| 10. Amendment / | Specification Amendment | Requires negotiation and agreement between manufacturer and customer. | - | - |
2411220246_JINJIA-XLR-18-2-N3GR_C558731.pdf
Related Products
electronic connector JINJIA XLR-19-6P designed to meet strict environmental and durability standards
Through Hole Circular Connector Assemblies RoHS
Durable XLR jack combo JINJIA XLR-19P-10P designed for stable audio connections in electronic devices
Through Hole Circular Connector Assemblies RoHS
electrical JINJIA XLR-26A-10P XLR jack combo connector rated voltage 50V AC 3A and 7.5A for electronic
Through Hole Circular Connector Assemblies RoHS
Speaker socket connection XLR jack combo JINJIA XLR-11W-N3B ideal for electronic device applications
Through Hole Circular Connector Assemblies RoHS
Durable JINJIA XLR-19P-7P XLR jack connector designed for stable electrical and mechanical performance
Through Hole Circular Connector Assemblies RoHS
XLR jack connector JINJIA XLR-14-N3B designed for stable performance in electronic product applications
Through Hole Circular Connector Assemblies RoHS
XLR jack combo connector JINJIA XLR-26A-7P-N3B rated for 3A and 7.5A current electronic applications
Through Hole Circular Connector Assemblies RoHS
Electronic XLR Jack Connector JINJIA XLR-15-N3GR Rated Voltage 50V AC And Current 6A For Industrial
Through Hole Circular Connector Assemblies RoHS
Electronic connector JINJIA XLR-26AP-10P optimized for dependable audio signal performance in devices
Through Hole Circular Connector Assemblies RoHS
electrical connector JINJIA XLR-25-N3B rated 50V AC 6A operating temperature range minus 30 to plus 80 degrees
Through Hole Circular Connector Assemblies RoHS
Send RFQ
Stock:
MOQ:
