Durable JINJIA DC 02D 03 DC power jack connector rated 30V DC 2A with insulation resistance 100 M min
Manufacturer:
JINJIA
Description:
Power Barrel Connector Jack 2mm ID 6.4mm OD Through Hole, Right Angle
Category:
Audio Connectors/Power Connectors
Specifications
Mounting Type:
弯插
Connector Type:
DC电源插座
Rated Current:
2A
Working Temperature:
-20℃~+70℃
Inside Contact Diameter:
2mm
Rated Voltage:
30V
Outside Contact Diameter:
6.4mm
Mfr. Part #:
DC+02D-03
Package:
Through Hole
Model Number:
DC+02D-03
Introduction
Product Overview
This specification applies to DC POWER JACK connectors used in electronic products. Designed for reliable electrical connections, these jacks offer specific operational and environmental tolerances.
Product Attributes
- Brand: Shenzhen JinJiaRun Electronics Technology Co.,Ltd
- Origin: Shenzhen
- Product Type: DC POWER JACK
Technical Specifications
| Item | Property | Test Condition | Performance |
| 2. Rated / | Practical temperature range | -20 to +70 | 85% RH.MAX. Humidity |
| Preservation temperature range | -10 to +40 | 85% RH.MAX. Humidity | |
| Rated voltage and current (MAX.) | 30V DC, 2A | ||
| Appearance | No scratches, soil, rust or discoloration on the surface. | ||
| 4. Electrical efficiency / | Withstand Voltage | Withstand AC 500V (50/60Hz RMS) between two non-contact terminals for 1 minute | No dielectric breakdown shall occur. |
| Insulation Resistance | Apply 500V DC between any contactless terminal and the other terminal, with an insulation gauge and last for 1 minute 5 seconds. | 100 M Min. | |
| Contact Resistance | Take a pair of matched terminals and measure the tail end of each terminal (voltage maximum 20mV, current maximum 100mA) | 30 m MAX. | |
| 5. Mechanical Performance / | Insertion and Extraction Force | Plug and unplug with a matching plug at a frequency of 20-30 times per minute. | 0.33kgf |
| Terminal Strength | Every terminal should be capable of withstand a force of 0.5 kgf for 10 seconds. | No looseness, damage, etc., but terminal deformation is acceptable. | |
| 6. Durability / | Life test | Under no load, plug and unplug with a matching plug for 5000 times at a frequency of 20-30 times per minute. | Appearance: No obvious change or destruction. Contact resistance: < 30 m. Insertion/extraction force: 0.3 to 3 kgf. |
| 7. Solderability / | Resistance to soldering heat | Terminal dipped in solder at 2603 for 51 seconds. | Plastic base should not be deformed, terminals should not fall off. |
| Solderability | Solder temperature: 2453C. Dip time: 30.5 seconds. | Coating of solder area should be more than 95%. | |
| 8. Environment test / | Cold test | Housing placed at -25 3 C for 96 hours, then under standard atmospheric conditions for 1 hour. | Appearance: No obvious change. Contact resistance: 100m max. Insulation resistance: 100 M min. Withstand voltage: AC 500V. |
| Heat test | Housing stored at 852 for 96 hours, then under standard atmospheric conditions for 1 hour. | (Performance details not explicitly stated for heat test alone, but implied to meet general standards) | |
| Humidity test | Housing stored at 403 with 90% ~ 95% RH for 96 hours, then under standard atmospheric conditions for 1 hour. | Appearance: No obvious change. Contact resistance: 100m max. Insulation resistance: 100 M min. Withstand voltage: AC 500V. | |
| Salt spray test | Temperature: 35 2. Solution: 5 1%. Spray time: 24 hours. Washed and dried at room temperature after experiment. | No obvious rust in the appearance. | |
| 9. Test condition / | Standard Conditions | Test and measurement temperature: 15C to 35C, relative humidity: 25% to 85%, atmospheric pressure: 86 kPa to 106 kPa. | For doubtful judgments: 201C, 63% to 67% RH, 86 kPa to 106 kPa. |
| 10. Amendment / | Modification Process | Specifications require negotiation and agreement between manufacturer and customer. | N/A |
2411220237_JINJIA-DC-02D-03_C718036.pdf
Related Products
JINJIA DC02IB DC power jack connector designed for stable power input in various electronic products
Power Barrel Connector Jack 2mm ID 6.4mm OD Through Hole, Right Angle
JINJIA DC 02IA DC power jack connector suitable for various electronic power connection applications
Power Barrel Connector Jack 2mm ID 6.4mm OD Through Hole, Right Angle
| Image | Part # | Description | |
|---|---|---|---|
|
|
JINJIA DC02IB DC power jack connector designed for stable power input in various electronic products |
Power Barrel Connector Jack 2mm ID 6.4mm OD Through Hole, Right Angle
|
|
|
|
JINJIA DC 02IA DC power jack connector suitable for various electronic power connection applications |
Power Barrel Connector Jack 2mm ID 6.4mm OD Through Hole, Right Angle
|
Send RFQ
Stock:
MOQ:
