JINJIA DC 02IA DC power jack connector suitable for various electronic power connection applications
Manufacturer:
JINJIA
Description:
Power Barrel Connector Jack 2mm ID 6.4mm OD Through Hole, Right Angle
Category:
Audio Connectors/Power Connectors
Specifications
Mounting Type:
弯插
Connector Type:
DC电源插座
Rated Current:
2A
Working Temperature:
-20℃~+70℃
Inside Contact Diameter:
2mm
Rated Voltage:
30V
Outside Contact Diameter:
6.4mm
Mfr. Part #:
DC+02IA
Package:
Through Hole
Model Number:
DC+02IA
Introduction
Product Overview
This specification applies to DC POWER JACK connectors used in electronic products. The product is designed for reliable power connections within electronic devices.
Product Attributes
- Brand: Shenzhen JinJiaRun Electronics Technology Co.,Ltd
- Origin: Shenzhen
- Type: DC POWER JACK
Technical Specifications
| Item | Property | Test Condition | Performance |
|---|---|---|---|
| Rated / | Practical temperature range | -20 to +70, 85% RH.MAX. | N/A |
| Preservation temperature range | -10 to +40, 85% RH.MAX. | N/A | |
| Rated voltage and current(MAX.) | 30V DC , 2A | N/A | |
| Appearance | N/A | No scratches, soil, rust or discoloration on the surface. | |
| Construction / | Outline And Dimension / | N/A | Should match the attachment drawing. |
| Construction / | Part And Material / | N/A | Should be consistent with the material list specifications. |
| Electrical efficiency / | Withstand Voltage / | Withstand AC 500V (50/60Hz RMS) between two non-contact terminals for 1 minute | No dielectric breakdown shall occur. |
| Insulation Resistance / | Apply 500V DC between any contactless terminal and the other terminal, with an insulation gauge and last for 1 minute 5 seconds. | 100 M Min. | |
| Electrical efficiency / | Contact Resistance / | Take a pair of matched terminals and measure the tail end of each terminal (voltage maximum 20mV, current maximum 100mA) | 30 m MAX. |
| Mechanical Performance / | Insertion and Extraction Force / & | Plug and unplug with a matching plug at a frequency of 20-30 times per minute. | 0.33kgf |
| Terminal Strength / | Every terminal should be capable of withstand a force of 0.5 kgf for 10 seconds. | No looseness, damage, etc., but terminal deformation is acceptable. | |
| Durability / | Life test / | Under no load, plug and unplug with a matching plug for 5000 times at a frequency of 20-30 times per minute. | No obvious change in appearance, destruction. Contact resistance: < 30 m. Insertion and extraction force: 0.3 to 3 kgf. |
| Solderability / | Resistance to soldering heat / | Terminal dipped in solder: Temperature 2603, Dip time 51 seconds. | Plastic base should not be deformed and terminals should not fall off. |
| Solderability / | Temperature of solder: 2453C. Time of dip: 30.5 seconds. | Coating of solder area should be more than 95%. | |
| Environment test / | Cold test / | Housing at -25 3 C for 96 hours, then 1 hour under standard conditions. | No obvious change in appearance. Contact resistance: 100m. Insulation resistance: 100 M. Withstand voltage: AC 500V. |
| Heat test / | Housing at 852 for 96 hours, then 1 hour under standard conditions. | N/A | |
| Humidity test / | Housing at 403, 90% ~ 95% RH for 96 hours, then 1 hour under standard conditions. | No obvious change in appearance. Contact resistance: 100m. Insulation resistance: 100 M. Withstand voltage: AC 500V. | |
| Salt spray test / | Temperature: 35 2, Solution: 5 1%, Spray time: 24 hours. Washed and dried at room temperature after experiment. | No obvious rust in the appearance. | |
| Test condition / | Standard conditions | Temperature: 15C to 35C, Relative humidity: 25% to 85%, Atmospheric pressure: 86 kPa to 106 kPa. For doubtful judgments: 201C, 63% to 67% RH, 86 kPa to 106 kPa. | N/A |
| Amendment / | N/A | Negotiated and agreed by manufacturer and customer. | N/A |
2411220123_JINJIA-DC-02IA_C718034.pdf
Related Products
JINJIA DC02IB DC power jack connector designed for stable power input in various electronic products
Power Barrel Connector Jack 2mm ID 6.4mm OD Through Hole, Right Angle
Durable JINJIA DC 02D 03 DC power jack connector rated 30V DC 2A with insulation resistance 100 M min
Power Barrel Connector Jack 2mm ID 6.4mm OD Through Hole, Right Angle
| Image | Part # | Description | |
|---|---|---|---|
|
|
JINJIA DC02IB DC power jack connector designed for stable power input in various electronic products |
Power Barrel Connector Jack 2mm ID 6.4mm OD Through Hole, Right Angle
|
|
|
|
Durable JINJIA DC 02D 03 DC power jack connector rated 30V DC 2A with insulation resistance 100 M min |
Power Barrel Connector Jack 2mm ID 6.4mm OD Through Hole, Right Angle
|
Send RFQ
Stock:
MOQ:
