JINJIA DC02IB DC power jack connector designed for stable power input in various electronic products
Manufacturer:
JINJIA
Description:
Power Barrel Connector Jack 2mm ID 6.4mm OD Through Hole, Right Angle
Category:
Audio Connectors/Power Connectors
Specifications
Mounting Type:
弯插
Connector Type:
DC电源插座
Rated Current:
2A
Working Temperature:
-20℃~+70℃
Inside Contact Diameter:
2mm
Rated Voltage:
30V
Outside Contact Diameter:
6.4mm
Mfr. Part #:
DC+02IB
Package:
Through Hole
Model Number:
DC+02IB
Introduction
Product Overview
This specification applies to DC POWER JACK connectors used in electronic products. These connectors are designed for reliable power input in various electronic devices.
Product Attributes
- Brand: Shenzhen JinJiaRun Electronics Technology Co.,Ltd
- Origin: Shenzhen
- Model Type: DC POWER JACK
Technical Specifications
| Item | Property | Test Condition | Performance |
|---|---|---|---|
| Rated / | Practical temperature range | -20to +70 | 85% RH.MAX. Humidity |
| Rated voltage and current(MAX.) | 30V DC , 2A | ||
| Electrical efficiency / | Withstand Voltage | Withstand AC 500V (50/60Hz RMS) between two non-contact terminals for 1 minute | No dielectric breakdown shall occur. |
| Insulation Resistance | Apply 500V DC between any contactless terminal and the other terminal, with an insulation gauge and last for 1 minute 5 seconds. | 100 M Min. | |
| Contact Resistance | Take a pair of matched terminals and measure the tail end of each terminal (voltage maximum 20mV, current maximum 100mA) | 30 m MAX. | |
| Mechanical Performance | Insertion and Extraction Force | Plug and unplug with a matching plug at a frequency of 20-30 times per minute. | Insertion and extraction force is 0.33kgf |
| Terminal Strength | Every terminal should be capable of withstand a force of 0.5 kgf for 10 seconds. | No looseness, damage, etc., but the terminal deformation is acceptable. | |
| Durability / | Life test | Under the condition of no load, plug and unplug with a matching plug for 5000 times in total, at a frequency of 20-30 times per minute. | Appearance no obvious change, destruction. Contact resistance: less than 30 m. Insertion and extraction force values: 0.3 to 3 kgf. |
| Solderability / | Resistance to soldering heat | The jack terminal should be dipped in solder: Temperature of solder: 2603. Dip time: 51 seconds. | After the test, the plastic base should not be deformed and the terminals should not fall off the plastic base. |
| Solderability | Temperature of solder: 2453C. Time of dip: 30.5 seconds. | Coating of solder area should be more than 95% | |
| Environment test / | Cold test | Place the housing for 96 hours at a low temperature of -25 3 C. Then ,place it under standard atmospheric conditions for 1 hour and test. | No obvious change in appearance. Contact resistance: 100m max. Insulation resistance: 100 M min. Withstand voltage: AC 500V. |
| Heat test | The housing should be stored at a temperature of 852for 96 hours. Then it should be subjected to standard atmospheric conditions for 1 hour and test. | ||
| Humidity test | The housing should be stored at a temperature of 403with relative humidity of 90% ~ 95% for 96 h. Then it should be subjected to standard atmospheric conditions for 1 hour and test. | No obvious change in appearance. Contact resistance: 100m max. Insulation resistance: 100 M min. Withstand voltage: AC 500V. | |
| Salt spray test | Temperature: 35 2 Solution: 5 1% Spray time: 24hours Wash and dry it at room temperature after the experiment. | No obvious rust in the appearance. |
2410121441_JINJIA-DC-02IB_C718035.pdf
Related Products
JINJIA DC 02IA DC power jack connector suitable for various electronic power connection applications
Power Barrel Connector Jack 2mm ID 6.4mm OD Through Hole, Right Angle
Durable JINJIA DC 02D 03 DC power jack connector rated 30V DC 2A with insulation resistance 100 M min
Power Barrel Connector Jack 2mm ID 6.4mm OD Through Hole, Right Angle
| Image | Part # | Description | |
|---|---|---|---|
|
|
JINJIA DC 02IA DC power jack connector suitable for various electronic power connection applications |
Power Barrel Connector Jack 2mm ID 6.4mm OD Through Hole, Right Angle
|
|
|
|
Durable JINJIA DC 02D 03 DC power jack connector rated 30V DC 2A with insulation resistance 100 M min |
Power Barrel Connector Jack 2mm ID 6.4mm OD Through Hole, Right Angle
|
Send RFQ
Stock:
MOQ:
