electronic connector JINJIA XLR-16AP-N3B suitable for temperature range minus 30 to plus 80 degrees
Manufacturer:
JINJIA
Description:
Through Hole Circular Connector Assemblies RoHS
Category:
Circular Connector Assemblies/Circular Connector Assemblies
Specifications
Mfr. Part #:
XLR-16AP-N3B
Package:
Through Hole
Model Number:
XLR-16AP-N3B
Introduction
XLR JACK SPECIFICATION
This specification applies to XLR jacks used in electronic products. These connectors are designed for reliable performance in various electronic applications.
Product Attributes
- Brand: Shenzhen jinjiarun Electronic Technology Co., Ltd
- Origin: China
- Document Number: JJR-WI-47
- Issue Date: 2008-09-10
- Version: A1
Technical Specifications
| Category | Item | Property | Test Condition | Performance |
|---|---|---|---|---|
| Rated / | Practical temperature range | -30 to +80 | ||
| Humidity range | 85% RH.MAX. | |||
| Preservation temperature range | -10 to +40 | Humidity range: 85% RH.MAX. (No Acid Alkaline Or Other Corrosive Airs, Storage Period Not Exceed 180 Days) | ||
| Rated voltage and current(MAX.) | 50V AC , 6A | |||
| Construction / | Outline And Dimension | Appearance and dimensions should match the attachment drawing. | ||
| Part And Material | Parts and materials should be consistent with the material list specifications. | |||
| Electrical efficiency / | Withstand Voltage | Withstand AC 1500V (50/60Hz RMS) between two non-contact terminals for 1 minute. No dielectric breakdown shall occur. | Between two non-contact terminals | No dielectric breakdown |
| Insulation Resistance | 10000 M Min. | Apply 500V DC between any contactless terminal and the other terminal for 1 minute 5 seconds. | 10000 M Min. | |
| Contact Resistance | 30 m MAX. | Measure the tail end of each terminal (voltage max 20mV, current max 100mA) of a pair of matched terminals. | 30 m MAX. | |
| Mechanical Performance | Insertion and withdrawal forces | Insertion: 35 N max. Withdrawal: 2 N min. | Rate of insertion/withdrawal: 2 mm/s. Mating of complete connectors without the effect of any latching or retaining device. | |
| Terminal Strength | No looseness, damage, etc., but terminal deformation is acceptable. | Each terminal should withstand a force of 0.5 kgf for 10 seconds. | ||
| Durability / | Life test | Appearance no obvious change, destruction. Contact resistance: less than 50 m. | Under no load, rotate and then plug in, rotate and then pull out with a matching plug for 1000 times in total, at a frequency of 5 times per minute. | |
| Solderability / | Resistance to soldering heat | Plastic base should not be deformed and terminals should not fall off the plastic base. | Dipped in solder at 2603 for 51 seconds. | |
| Solderability | Solder area coating should be more than 95% | Solder temperature: 2453C. Time of dip: 30.5 seconds. | ||
| Environment test / | Cold test | Appearance no obvious change. Contact resistance: 50 m max. Insulation resistance: 500 M min. Withstand voltage: AC 1000V. | Place housing for 96 hours at -30 3 C. Then, place under standard atmospheric conditions for 1 hour and test. | |
| Heat test | Store housing at 802 for 96 hours. Then subject to standard atmospheric conditions for 1 hour and test. | |||
| Humidity test | Appearance no obvious change. Contact resistance: 50m max. Insulation resistance: 500 M min. Withstand voltage: AC 1000V. | Store housing at 403 with relative humidity of 90% ~ 95% for 96 h. Then subject to standard atmospheric conditions for 1 hour and test. | ||
| Temperature Cycling | Place the Jack under specified conditions and then place in stand at room temperature for 30 minutes. | |||
| Salt spray test | No obvious rust in appearance. | Temperature: 35 2. Solution: 5 1%. Spray time: 24 hours. Wash and dry at room temperature after experiment. | ||
| Test condition / | Test and measurement temperature: 15C to 35C, relative humidity: 25% to 85%, atmospheric pressure: 86 kPa to 106 kPa. (For judgment doubts: 201C, 63% to 67% RH, 86 kPa to 106 kPa) | |||
| Amendment / | Amendments require negotiation and agreement between manufacturer and customer. |
2411220051_JINJIA-XLR-16AP-N3B_C558726.pdf
Related Products
electronic connector JINJIA XLR-19-6P designed to meet strict environmental and durability standards
Through Hole Circular Connector Assemblies RoHS
Durable XLR jack combo JINJIA XLR-19P-10P designed for stable audio connections in electronic devices
Through Hole Circular Connector Assemblies RoHS
electrical JINJIA XLR-26A-10P XLR jack combo connector rated voltage 50V AC 3A and 7.5A for electronic
Through Hole Circular Connector Assemblies RoHS
Speaker socket connection XLR jack combo JINJIA XLR-11W-N3B ideal for electronic device applications
Through Hole Circular Connector Assemblies RoHS
Durable JINJIA XLR-19P-7P XLR jack connector designed for stable electrical and mechanical performance
Through Hole Circular Connector Assemblies RoHS
XLR jack connector JINJIA XLR-14-N3B designed for stable performance in electronic product applications
Through Hole Circular Connector Assemblies RoHS
XLR jack combo connector JINJIA XLR-26A-7P-N3B rated for 3A and 7.5A current electronic applications
Through Hole Circular Connector Assemblies RoHS
Electronic XLR Jack Connector JINJIA XLR-15-N3GR Rated Voltage 50V AC And Current 6A For Industrial
Through Hole Circular Connector Assemblies RoHS
Electronic connector JINJIA XLR-26AP-10P optimized for dependable audio signal performance in devices
Through Hole Circular Connector Assemblies RoHS
electrical connector JINJIA XLR-25-N3B rated 50V AC 6A operating temperature range minus 30 to plus 80 degrees
Through Hole Circular Connector Assemblies RoHS
Send RFQ
Stock:
MOQ:
