electronic connector JINJIA XLR-20AW-1 suitable for audio signal transmission in various devices
Manufacturer:
JINJIA
Description:
Through Hole Circular Connector Assemblies RoHS
Category:
Circular Connector Assemblies/Circular Connector Assemblies
Specifications
Mfr. Part #:
XLR-20AW-1
Package:
Through Hole
Model Number:
XLR-20AW-1
Introduction
Product Overview
This specification applies to XLR jack (SPEAKON) connectors used in electronic products. These connectors are designed for audio signal applications and are not to be used as AC mains or power supply connectors.
Product Attributes
- Brand: Jinjiarun ()
- Origin: Shenzhen, China
- Document Number: JJR-WI-48
- Issue Date: 2008-09-10
- Version: A1
Technical Specifications
| Item | Property | Test Condition | Performance |
| 2. Rated / | Practical temperature range | -30to +80 | |
| Humidity range | 85% RH.MAX. | ||
| Preservation temperature range | -10to +40 | ||
| Humidity range (Preservation) | 85% RH.MAX. | ||
| Storage Conditions | Ambient air free of acid, alkaline or other corrosive gases. Storage period not exceeding 180 days. | ||
| Rated voltage and current (MAX.) | 250V AC , 15A (continuous) | ||
| Audio signal rating | 30 A, duty cycle 50% | ||
| 2-4. Appearance | No scratches, soil, rust or discoloration on the surface. | ||
| 3-1. Outline And Dimension | Attachment drawing | Should match the attachment drawing. | |
| 3-2. Part And Material | Material list specifications | Should be consistent with the material list specifications. | |
| 4. Electrical efficiency | Withstand Voltage | AC 4000V (50/60Hz RMS) between two non-contact terminals for 1 minute | No dielectric breakdown shall occur. |
| Insulation Resistance | Apply 500V DC between any contactless terminal and the other terminal, for 1 minute 5 seconds | 1000 M Min. | |
| Contact Resistance | Measure at the tail end of each terminal (voltage max 20mV, current max 100mA) for a matched pair of terminals. | 30 m MAX. | |
| 5. Mechanical Performance | Terminal Strength | Each terminal should withstand a force of 0.5 kgf for 10 seconds. | No looseness, damage, etc. Terminal deformation is acceptable. |
| 6. Durability | Life test | Under no load, plug in/out with a matching plug 5000 times at a frequency of 5 times per minute. | Appearance: No obvious change. Destruction: Contact resistance less than 50 m. |
| 7. Solderability | Resistance to soldering heat | Terminal dipped in solder at 2603 for 51 seconds. | Plastic base should not be deformed and terminals should not fall off. |
| Solderability | Solder temperature: 2453C. Dip time: 30.5 seconds. | Coating of solder area should be more than 95%. | |
| 8. Environment test | Cold test | Housing stored at -30 3 C for 96 hours, then under standard atmospheric conditions for 1 hour. | Appearance: No obvious change. Contact resistance: 50 m. Insulation resistance: 500 M. Withstand voltage: AC 1000V. |
| Heat test | Housing stored at 802 for 96 hours, then under standard atmospheric conditions for 1 hour. | ||
| Humidity test | Housing stored at 403 with 90% ~ 95% RH for 96 hours, then under standard atmospheric conditions for 1 hour. | Appearance: No obvious change. Contact resistance: 50 m. Insulation resistance: 500 M. Withstand voltage: AC 1000V. | |
| Temperature Cycling | Conditions as shown below, then placed in room temperature for 30 minutes. | ||
| Salt spray test | Temperature: 35 2. Solution: 5 1%. Spray time: 24 hours. Washed and dried at room temperature after the experiment. | Appearance: No obvious rust. | |
| 9. Test condition | Standard conditions | Temperature: 15C~35C, Relative humidity: 25%~85%, Atmospheric pressure: 86 kPa~106 kPa. | |
| Doubtful judgment conditions | Temperature: 201C, Relative humidity: 63%~67%, Atmospheric pressure: 86 kPa~106 kPa. | ||
| 10. Amendment | Procedure | Amendments require negotiation and agreement between the manufacturer and the customer. |
2411220237_JINJIA-XLR-20AW-1_C558745.pdf
Related Products
electronic connector JINJIA XLR-19-6P designed to meet strict environmental and durability standards
Through Hole Circular Connector Assemblies RoHS
Durable XLR jack combo JINJIA XLR-19P-10P designed for stable audio connections in electronic devices
Through Hole Circular Connector Assemblies RoHS
electrical JINJIA XLR-26A-10P XLR jack combo connector rated voltage 50V AC 3A and 7.5A for electronic
Through Hole Circular Connector Assemblies RoHS
Speaker socket connection XLR jack combo JINJIA XLR-11W-N3B ideal for electronic device applications
Through Hole Circular Connector Assemblies RoHS
Durable JINJIA XLR-19P-7P XLR jack connector designed for stable electrical and mechanical performance
Through Hole Circular Connector Assemblies RoHS
XLR jack connector JINJIA XLR-14-N3B designed for stable performance in electronic product applications
Through Hole Circular Connector Assemblies RoHS
XLR jack combo connector JINJIA XLR-26A-7P-N3B rated for 3A and 7.5A current electronic applications
Through Hole Circular Connector Assemblies RoHS
Electronic XLR Jack Connector JINJIA XLR-15-N3GR Rated Voltage 50V AC And Current 6A For Industrial
Through Hole Circular Connector Assemblies RoHS
Electronic connector JINJIA XLR-26AP-10P optimized for dependable audio signal performance in devices
Through Hole Circular Connector Assemblies RoHS
electrical connector JINJIA XLR-25-N3B rated 50V AC 6A operating temperature range minus 30 to plus 80 degrees
Through Hole Circular Connector Assemblies RoHS
Send RFQ
Stock:
MOQ:
