Durable RF 1.0H Connector MyAntenna A-IPEX5-0.57A with Brass Bronze Contacts and Phosphor Bronze Shell
Manufacturer:
MyAntenna
Description:
Connector Receptacle IPEX Male Pin 50Ω Surface Mount,1.7x1.7mm
Category:
Coaxial Connector (RF) Adapters/Coaxial Connector (RF) Assemblies
Specifications
Number Of Ports:
1
Interface:
内针
RF Series:
IPEX
Connector Type:
板端
Operating Temperature:
-40℃~+90℃
Frequency:
6GHz
Impedance:
50Ω
Interface Diameter:
1.5mm
Mfr. Part #:
A-IPEX5-0.57A
Package:
SMD
Model Number:
A-IPEX5-0.57A
Introduction
Product Overview
This specification covers performance, tests, and quality requirements for the RF 1.0H CONNECTOR, specifically the 5th generation end plate (A-IPEX5-0.57A). It details electrical, mechanical, and environmental characteristics essential for its application.
Product Attributes
- Product Name: RF 1.0H CONNECTOR
- Model: A-IPEX5-0.57A (5th generation end plate)
- Housing Material: Thermoplastic Plastic
- Contact Material: Brass Bronze
- Shell Material: Phosphor Bronze
Technical Specifications
| Category | Item | Specification | Test Procedure/Conditions |
| Ratings | Voltage Rating | 60VAC | |
| Nominal Characteristic Impedance | 50 | ||
| Frequency | DC 0.1~6GHz | ||
| VSWR | PLUG: 1.3 Max. (DC 0.1~3GHz), 1.5 Max. (3~6GHz) Receptacle: 1.3 Max. (DC 0.1~3GHz), 1.4 Max. (3~6GHz) | ||
| Service Temperature | -40 to 90 (233~363K) | ||
| Electrical Performance | Low Level Contact Resistance | Initial: 20m Max. Final: 40m Max. | Mated connector, 20 mV Max. Open circuit at 10 mA Max. MIL-STD-202, Method 307 |
| Insulation Resistance | Initial: 500 M Min. Final: 100 M Min. | 100V DC for 1 minute. Test between adjacent circuits and contact. MIL-STD-202, Method 302 | |
| Dielectric Withstanding Voltage | No creeping discharge or flash over shall occur. Current leakage: 2mA Max. | 200V AC for 1 minute. Test between adjacent circuits and contact. MIL-STD-202 Method 301 | |
| VSWR | Plug: 1.3 Max. at 0.1~3GHz, 1.5 Max. at 3~6GHz | Frequency: 100M~6GHz. Measured by network analyzer. | |
| Receptacle: 1.3 Max. at 0.1~3GHz, 1.4 Max. at 3~6GHz | |||
| Mechanical Performance | Un-mating Force | Total: Initial 5N Min., after 30 cycles 3N Min. Inner Contact: Initial 0.15N Min., after 30 cycles 0.1N Min. | Push-on/pull-off speed 253mm/min. |
| Crimp Strength | 7N MIN | Tensile strength machine at 253mm/min. | |
| Durability | Inner Contact Resistance: Initial 20m Max., after testing 40m Max. Ground Contact Resistance: Initial 10m Max., after testing 30m Max. | Mate and un-mate 30 cycles at 253mm/min. | |
| Environmental Performance | Salt Spray | Appearance no abnormality. Inner Contact Resistance: Initial 20m Max., after testing 40m Max. Ground Contact Resistance: Initial 10m Max., after testing 30m Max. | MIL-STD-202, Method 101, Condition B. 352, 51% salt water, 48 hours. |
| Temperature Life | Appearance no abnormality. Inner Contact Resistance: Initial 20m Max., after testing 40m Max. Ground Contact Resistance: Initial 10m Max., after testing 30m Max. Insulation Resistance: Initial 500M Min., after testing 100M Min. | 902, 96 hours. | |
| Thermal Shock | Appearance no abnormality. Inner Contact Resistance: Initial 20m Max., after testing 40m Max. Ground Contact Resistance: Initial 10m Max., after testing 30m Max. Insulation Resistance: Initial 500M Min., after testing 100M Min. D.W.Voltage: No creeping discharge, flashover, nor insulator breakdown. | 5 cycles: -40/30min, 5~35/5min max, 90/30min, 5~35/5min max. | |
| Humidity | Appearance no abnormality. Inner Contact Resistance: Initial 20m Max., after testing 40m Max. Ground Contact Resistance: Initial 10m Max., after testing 30m Max. Insulation Resistance: Initial 500M Min., after testing 100M Min. D.W.Voltage: No creeping discharge, flashover, nor insulator breakdown. | MIL-STD-202, Method 103, Condition B. 402, 90~95% RH, 96 hours. |
2410121519_MyAntenna-A-IPEX5-0-57A_C22467683.pdf
Related Products
PCB Mount SMA Jack Connector MyAntenna A-SMA-KE-13.5A Featuring Gold Plated Brass and PTFE Insulator
1 Inner Bore SMA Board Side Offset Pin 6GHz 50Ω 5.35mm SMD Coaxial Connector (RF) Assemblies RoHS
PCB Mount SMA Connector MyAntenna A-SMA-KWE-16.18A Supporting DC to 6GHz Frequency Range and 50 Ohm Impedance
Connector Receptacle SMA Female Pin 50Ω Through Hole Positive Pin
PCB Mount SMA Jack Connector with 500 Plug Unplug Cycles and RoHS Compliance MyAntenna A-SMA-KE-16.5A Electrical Specs
Connector Receptacle SMA Female Pin 50Ω Surface Mount Offset Pin
RF coaxial connector MyAntenna A-IPEX3-0.85A featuring low contact resistance and ROSH certification
Connector Receptacle IPEX Male Pin 50Ω Surface Mount
Tested RF Coaxial Connector MyAntenna A-IPEX1-1.25A Meeting Strict Electrical Mechanical Requirements
Connector Receptacle IPEX Male Pin 50Ω Surface Mount
MyAntenna A IPEX4 0 6A SMT RF Connector for PDA Mobile Phones Wireless LAN Bluetooth and GPS Devices
Connector Receptacle IPEX Male Pin 50Ω Surface Mount,1.8x1.7mm
Send RFQ
Stock:
MOQ:
