Home > Products > Coaxial Connector (RF) Adapters >Coaxial Connector (RF) Assemblies > MyAntenna A IPEX4 0 6A SMT RF Connector for PDA Mobile Phones Wireless LAN Bluetooth and GPS Devices

MyAntenna A IPEX4 0 6A SMT RF Connector for PDA Mobile Phones Wireless LAN Bluetooth and GPS Devices

Manufacturer:
MyAntenna
Description:
Connector Receptacle IPEX Male Pin 50Ω Surface Mount,1.8x1.7mm
Category:
Coaxial Connector (RF) Adapters/Coaxial Connector (RF) Assemblies
Specifications
Number Of Ports:
1
Interface:
内针
RF Series:
IPEX
Connector Type:
板端
Operating Temperature:
-40℃~+85℃
Frequency:
6GHz
Impedance:
50Ω
Interface Diameter:
1.6mm
Mfr. Part #:
A-IPEX4-0.6A
Package:
SMD
Model Number:
A-IPEX4-0.6A
Introduction

Product Description

This SMT type Micro coaxial RF Rec.products (A-IPEX4-0.6A) are designed for Mobile phones, Wireless LAN, Mini-PCI, Bluetooth, PDA, GPS, electronic measuring instruments, etc. This specification covers the requirements for product performance, test methods and quality assurance provisions of USS RF Receptalce (IV Generation) Connectors.

Product Attributes

  • Brand: USS
  • Model: A-IPEX4-0.6A
  • Type: IV Generation RF Receptacle Connector
  • Technology: SMT Micro coaxial RF

Technical Specifications

ParameterValueUnitNotes
Voltage Rating60VAC (R.M.S)
Frequency RangeDC~6GHz
Nominal Characteristic Impedance50Ohm5
Operating Temperature Range-40~+85
Operating Humidity95% R.H.MAX
Initial Insulation Resistance500M Ohm
Inner Contact Resistance20milliohm Max.Initial & After Tested
Outer Contact Resistance20milliohm Max.Initial & After Tested
Withstand Voltage200V AC1 Min.
V.S.W.R1.3 Max.DC~3GHz
V.S.W.R1.4 Max.3~6GHz
Electrical Contact Resistance (Inner)20m MAXInitial & After
Electrical Contact Resistance (Ground)20m MAXInitial & After
Insulation Resistance500 Min.MInitial
Insulation Resistance100 Min.MAfter Tested
Dielectric Withstanding Voltage200V ACNo flashover, No sparkover, No excess leakage, No breakdown
Un-mating Force (Initial)4N (0.4Kgf) Min.
Un-mating Force (After 30 Cycles)2N(0.2Kgf) Min.
Durability100CyclesAppearance: No abnormality, Contact Resistance: Meets 5.1
Vibration1.5mm or 59 m/s(6G)No discontinuities of 1s or longer duration
Shock735m/s(75G)Duration: 11ms, Wave form: half sinusoidal, No discontinuities of 1s or longer duration
Humidity Test25~65, 90~95%R.H, 96 hoursAppearance: No abnormality, Meets 5.5.1, 5.5.2, 5.5.3
Thermal Shock-55~85, Transition time: 5min MAX, 5 CyclesAppearance: No abnormality, Meets 5.5.1, 5.5.2, 5.5.3
Resistance to Soldering HeatReflow soldering conditionAppearance: No abnormality, Meets 5.5.1, 5.5.2, 5.5.3
Salt Spray352, 90~98%R.H, 51% Salt water, 48 hoursAppearance: No abnormality, Contact Resistance: Meets 5.5.1
Solderability2452, 3~5 secondsAt least 95% covered by a continuous new solder coating
Cover Tape Peeling ForceMax. 1.3NAt 300mm/min speed
Storage Temperature-10~+40
Storage Humidity85% R.H.MAX
Shelf Life6MonthsFrom product receipt

2410121451_MyAntenna-A-IPEX4-0-6A_C22467597.pdf

Related Products
Image Part # Description
quality PCB Mount SMA Jack Connector MyAntenna A-SMA-KE-13.5A Featuring Gold Plated Brass and PTFE Insulator factory

PCB Mount SMA Jack Connector MyAntenna A-SMA-KE-13.5A Featuring Gold Plated Brass and PTFE Insulator

1 Inner Bore SMA Board Side Offset Pin 6GHz 50Ω 5.35mm SMD Coaxial Connector (RF) Assemblies RoHS
quality PCB Mount SMA Connector MyAntenna A-SMA-KWE-16.18A Supporting DC to 6GHz Frequency Range and 50 Ohm Impedance factory

PCB Mount SMA Connector MyAntenna A-SMA-KWE-16.18A Supporting DC to 6GHz Frequency Range and 50 Ohm Impedance

Connector Receptacle SMA Female Pin 50Ω Through Hole Positive Pin
quality PCB Mount SMA Jack Connector with 500 Plug Unplug Cycles and RoHS Compliance MyAntenna A-SMA-KE-16.5A Electrical Specs factory

PCB Mount SMA Jack Connector with 500 Plug Unplug Cycles and RoHS Compliance MyAntenna A-SMA-KE-16.5A Electrical Specs

Connector Receptacle SMA Female Pin 50Ω Surface Mount Offset Pin
quality RF coaxial connector MyAntenna A-IPEX3-0.85A featuring low contact resistance and ROSH certification factory

RF coaxial connector MyAntenna A-IPEX3-0.85A featuring low contact resistance and ROSH certification

Connector Receptacle IPEX Male Pin 50Ω Surface Mount
quality Tested RF Coaxial Connector MyAntenna A-IPEX1-1.25A Meeting Strict Electrical Mechanical Requirements factory

Tested RF Coaxial Connector MyAntenna A-IPEX1-1.25A Meeting Strict Electrical Mechanical Requirements

Connector Receptacle IPEX Male Pin 50Ω Surface Mount
quality Durable RF 1.0H Connector MyAntenna A-IPEX5-0.57A with Brass Bronze Contacts and Phosphor Bronze Shell factory

Durable RF 1.0H Connector MyAntenna A-IPEX5-0.57A with Brass Bronze Contacts and Phosphor Bronze Shell

Connector Receptacle IPEX Male Pin 50Ω Surface Mount,1.7x1.7mm
Send RFQ
Stock:
MOQ: