2.54mm Pin Header Connector Solutions Including Ckmtw B-2100R03P-A110 for Single and Double Row Pins
Manufacturer:
Ckmtw
Description:
Pin Header 3P 1x3P 2.54mm Brass 2.5mm 6mm 250V 3A 1 -40℃~+105℃ Right Angle Through Hole,Right Angle,P=2.54mm Headers, Male Pins RoHS
Category:
Free Hanging, Panel Mount/Headers, Male Pins
Specifications
Circluar Pins/Square Pins:
方针
Number Of Pins:
3P
Pins Structure:
1x3P
Pitch:
2.54mm
Contact Material:
黄铜
Insulation Height:
2.5mm
Length Of Mating Pin:
6mm
Voltage Rating (Max):
250V
Current Rating-Signal:
3A
Number Of Rows:
单排
Operating Temperature:
-40℃~+105℃
Mounting Type:
弯插
Mfr. Part #:
B-2100R03P-A110
Package:
Through Hole,Right Angle,P=2.54mm
Model Number:
B-2100R03P-A110
Introduction
Product Overview
This specification covers the 2.54mm Pin Header spacing Connector series, including single-row straight pins, single-row right-angle pins, double-row straight pins, double-row right-angle pins, and surface mount variants. These connectors are designed for various electrical applications with rated voltage and current capabilities.
Product Attributes
- Brand: SHENZHEN CANKEMENG INDUSTRAIAL CO.LTD
- Origin: China
- Production Base: JIANGXI CANKEMENG ELECTRONICS CO.LTD
- Company Address (Shenzhen): Building 5, No. 36, Lihu Community, Xinhu Street, Guangming District, Shenzhen
- Company Address (Jiangxi): Putian Industrial Zone, Zhajin Town, Xiushui County, Jiujiang City, Jiangxi Province
- Contact Tel: 0755-81488157
- Contact Fax: 0755-83425987
- Contact Email: ckmtw168@163.com, ckm-scb@ckmtw.com.cn
Technical Specifications
| Product Name | Part Number | Rated Voltage (Max) | Rated Current (Max) | Ambient Temperature |
|---|---|---|---|---|
| Single Row Straight Pin | 210S-1*XP | 250V AC/DC | 3A | -40-+105 |
| Single Row Right-Angle Pin | 210R-1*XP | 250V AC/DC | 3A | -40-+105 |
| Double Row Straight Pin | 210S-2*XP | 250V AC/DC | 3A | -40-+105 |
| Double Row Right-Angle Pin | 210R-2*XP | 250V AC/DC | 3A | -40-+105 |
| Single Row Surface Mount | 210SMT-1*XP | 250V AC/DC | 3A | -40-+105 |
| Double Row Surface Mount | 210SMT-2*XP | 250V AC/DC | 3A | -40-+105 |
| Item | Test Condition | Requirement |
|---|---|---|
| 3.1 Electrical Performance | ||
| Contact Resistance | Mate connectors, reassure by dry circuit, 20mV MAX, 10mv. (Based upon JIS C5402 5.4) | 0.02 (MAX) |
| Insulation Resistance | Mate connectors, apply 500V DC between adjacent terminal or ground. (Based upon JIS C5402 5.2/MIL-STD-202 method 302 condition B) | 1000 M (MIN) |
| Dielectric Strength | Mate connectors, apply 500V AC for 1 minute between adjacent terminal or ground. (Based upon JIS C5402 5.1/MIL-ST-202 Method 301) | No breakdown and flashover |
| 3.2 Mechanical Performance | ||
| Insertion Force and Withdrawal Force (Whole Connector) | Insert and withdraw connectors at the speed rate of 253mm/minute. Mated 30 times. | Insertion Force: 0.2 kg/Pin (MAX), Withdrawal Force: 0.02 kg/Pin (MIN) |
| Pin Insertion Force (Single Pin) | Insert the crimped terminal into the connectors. | 1.5 kg/Pin (MAX) |
| Pin Retention Force (Single Pin) | Apply axial push force at the speed rate of 253mm/minute. | 0.5 kg/Pin (MIN) |
| 3.3 Environmental Performance and Others | ||
| Contact Resistance (After Repeated Insertion/Withdrawal) | When mated up to 30 cycles repeatedly by the rate of 10 cycles per minute. | 40m MAX |
| Salt Spray | 24 hours exposure to a salt spray from the 51% solution at 352. (Based upon JIS C5402/MIL-STD-202 method 101D conditions. B) | Appearance: No Damage, Contact Resistance: 40m MAX |
| Solderability | Soldering time: 30.5sec, solder temperature: 2305 | 95% solderable area |
| Resistance to Soldering Heat | Soldering time: 51sec, solder temperature: PBT: 2205, PA6T: 2605, PA9T: 2705 | No Damage |
| Life Test | 500 cycles | Appearance and function: No Damage |
Note: The above tests are subject to the company's testing conditions/capabilities.
Product Shape, Dimensions and Materials: Refer to attached drawings.
Packaging, Transportation, and Storage:
Packaging: Inner packaging is blister tray, outer packaging is carton. Products are sealed in the box without shaking.
Transportation: Any mode of transportation is allowed, but avoid direct rain, snow, and mechanical damage.
Storage:
- Connectors should be stored in a warehouse with ambient temperature of -10~40, relative humidity not greater than 80%, and no acidic, alkaline, or other corrosive gases in the surrounding air.
- The storage period for this product is 12 months. Re-inspection is required after 12 months. It is most suitable to use within 3 months. The company is not responsible for any abnormalities found if used beyond the storage period.
2508111740_Ckmtw-B-2100R03P-A110_C49423316.pdf
Related Products
Connector Ckmtw W-2510R02P-0000 offering excellent electrical properties for various industrial uses
Connector Header 2 position 2.54mm Pitch Right Angle
Connector Ckmtw W-1251R06P-0200 with Metal H62 Y2 Brass Tin Plated and Plastic PA66 UL94V 0 Material
Connector Header 6 position 1.25mm Pitch Right Angle
Durable Connector Ckmtw W-1251S15P-0201 with Brass Tin Plated Metal and Flame Retardant PA66 Plastic
Connector Header 15 position 1.25mm Pitch
Durable Wire to Board Connector Ckmtw W-0800M05P-R000 Featuring 0.8mm Pitch Pressure Type Bar Design
1x5P Tin 0.8mm 50V 5 1 Surface Mount, Right Angle -25℃~+85℃ SMD,P=0.8mm,Surface Mount,Right Angle Headers, Male Pins RoHS
Durable 0.8mm pitch pressure type bar connector Ckmtw W-0800M09P-R000 for wire to board applications
1x9P Tin 0.8mm 50V 9 1 Surface Mount, Right Angle -25℃~+85℃ SMD,P=0.8mm,Surface Mount,Right Angle Headers, Male Pins RoHS
Surface Mount Wire to Board Connector SUH0.8 Series 0.8mm Pitch Rated Voltage 50V Ckmtw W 0800N02P R000
1x2P Tin 0.8mm 50V 2 1 Surface Mount,Vertical -25℃~+85℃ SMD,P=0.8mm Headers, Male Pins RoHS
connection solution Ckmtw W-0800N06P-R000 pressure type bar connector with 0.8mm pitch and 50V rating
1x6P Tin 0.8mm 50V 6 1 Surface Mount,Vertical -25℃~+85℃ SMD,P=0.8mm Headers, Male Pins RoHS
Right angle connector strip ultra thin gold plated Ckmtw W-1253M05P-0420 1.25mm pitch designed for electrical and PCB
SMD,P=1.25mm,Surface Mount,Right Angle Headers, Male Pins RoHS
connector Ckmtw W-1251S02P-0200 with 3 amp current rating and temperature range minus 25 to 85 degrees
Connector Header 2 position 1.25mm Pitch
electrical connector strip Ckmtw W-1253M10P-0420 for AWG28 to 32 wire gauges and PC board thickness
SMD,P=1.25mm,Surface Mount,Right Angle Headers, Male Pins RoHS
Send RFQ
Stock:
MOQ:
