Ckmtw B2100R16PA110 254mm Pin Header Connector Series Offering Electrical And Mechanical Performance
Manufacturer:
Ckmtw
Description:
Pin Header 1x16P 16P 2.54mm Brass 2.5mm 6mm 250V 3A 1 -40℃~+105℃ Right Angle Through Hole,Right Angle,P=2.54mm Headers, Male Pins RoHS
Category:
Free Hanging, Panel Mount/Headers, Male Pins
Specifications
Circluar Pins/Square Pins:
方针
Pins Structure:
1x16P
Number Of Pins:
16P
Pitch:
2.54mm
Contact Material:
黄铜
Insulation Height:
2.5mm
Length Of Mating Pin:
6mm
Voltage Rating (Max):
250V
Current Rating-Signal:
3A
Number Of Rows:
单排
Operating Temperature:
-40℃~+105℃
Mounting Type:
弯插
Mfr. Part #:
B-2100R16P-A110
Package:
Through Hole,Right Angle,P=2.54mm
Model Number:
B-2100R16P-A110
Introduction
Product Overview
This specification covers the 2.54mm Pin Header spacing Connector series. It details the product's electrical, mechanical, and environmental performance, along with dimensions, materials, and packaging requirements.
Product Attributes
- Brand: SHENZHEN CANKEMENG INDUSTRAIAL CO.LTD
- Origin: China
- Production Base: JIANGXI CANKEMENG ELECTRONICS CO.LTD
- Company Address (Jiangxi): Putian Industrial Zone, Zhajin Town, Xiushui County, Jiujiang City, Jiangxi Province
- Company Address (Shenzhen): Building 5, No. 36, Lihu Community, Xinhu Street, Guangming District, Shenzhen
- Contact Tel: 0755-81488157
- Contact Fax: 0755-83425987
- Contact Email: ckmtw168@163.com, ckm-scb@ckmtw.com.cn
Technical Specifications
| Product Name | Part Number | Rated Voltage (Max) | Rated Current (Max) | Ambient Temperature |
|---|---|---|---|---|
| 2.54mm Pin Header Series | B-2100RXXP-A110 | 250V AC/DC | 3A | -40-+105 |
| Item | Test Condition | Requirement |
|---|---|---|
| 3.1 Electrical Performance | ||
| Contact Resistance | Mate connectors, reassure by dry circuit ,20mV MAX,10mv. (Based upon JIS C5402 5.4) | 0.02 (MAX) |
| Insulation Resistance | Mate connectors, apply 500V DC between adjacent terminal or ground. (Based upon JIS C5402 5.2/MIL-STD-202 method 302 condition B) | 1000 M (MIN) |
| Dielectric Strength | Mate connectors, apply 500V AC for 1 minute between adjacent terminal or ground. (Based upon JIS C5402 5.1/MIL-ST-202 Method 301) | No breakdown and flashover |
| 3.2 Mechanical Performance | ||
| Insertion Force and Withdrawal Force (Whole Connector) | Insert and withdraw connectors at the speed rate of 253mm/minute. Mated 30 cycles. | Insertion Force: 0.2 kg/Pin (MAX) Withdrawal Force: 0.02 kg/Pin (MIN) |
| Pin Insertion Force (Single Pin) | Insert the crimped terminal into the connectors. | 1.5 kg/Pin (MAX) |
| Pin Retention Force (Single Pin) | Apply axial push force at the speed rate of 253mm/minute. | 0.5 kg/Pin MIN |
| 3.3 Environmental Performance and Others | ||
| Contact Resistance (After Repeated Insertion/Withdrawal) | When mated up to 30 cycles repeatedly by the rate of 10 cycles per minute. | 40m MAX |
| Salt Spray | 24 hours exposure to a salt spray from the 51% solution at 352. (Based upon JIS C5402/MIL-STD-202 method 101D conditions. B) | Appearance: No Damage Contact Resistance: 40m MAX |
| Solderability | Soldering time: 30.5sec, solder temperature: 2305 | 95% or more solderable area |
| Resistance to Soldering Heat | Soldering time: 51sec, solder temperature: PBT: 2205, PA6T: 2605, PA9T: 2705 | No Damage |
| Life Test | 500 cycles | Appearance and function: No Damage |
Note: The above tests are subject to the company's test conditions/capabilities.
Product Shape, Dimensions and Materials: Refer to attached drawings.
Packaging, Transportation and Storage:
- Packaging: Inner packaging is blister box, outer packaging is carton. Products are sealed in the box without shaking.
- Transportation: Any mode of transportation is allowed, but avoid direct rain, snow, and mechanical damage.
- Storage:
- Connectors should be stored in a warehouse with ambient temperature of -10~40, relative humidity not greater than 80%, and no acidic, alkaline, or other corrosive gases in the surrounding air.
- The product's shelf life is 12 months. Re-inspection is required after 12 months. It is recommended to use within 3 months. The company is not responsible for any abnormalities found if used beyond the storage period.
2508111740_Ckmtw-B-2100R16P-A110_C49423327.pdf
Related Products
Connector Ckmtw W-2510R02P-0000 offering excellent electrical properties for various industrial uses
Connector Header 2 position 2.54mm Pitch Right Angle
Connector Ckmtw W-1251R06P-0200 with Metal H62 Y2 Brass Tin Plated and Plastic PA66 UL94V 0 Material
Connector Header 6 position 1.25mm Pitch Right Angle
Durable Connector Ckmtw W-1251S15P-0201 with Brass Tin Plated Metal and Flame Retardant PA66 Plastic
Connector Header 15 position 1.25mm Pitch
Durable Wire to Board Connector Ckmtw W-0800M05P-R000 Featuring 0.8mm Pitch Pressure Type Bar Design
1x5P Tin 0.8mm 50V 5 1 Surface Mount, Right Angle -25℃~+85℃ SMD,P=0.8mm,Surface Mount,Right Angle Headers, Male Pins RoHS
Durable 0.8mm pitch pressure type bar connector Ckmtw W-0800M09P-R000 for wire to board applications
1x9P Tin 0.8mm 50V 9 1 Surface Mount, Right Angle -25℃~+85℃ SMD,P=0.8mm,Surface Mount,Right Angle Headers, Male Pins RoHS
Surface Mount Wire to Board Connector SUH0.8 Series 0.8mm Pitch Rated Voltage 50V Ckmtw W 0800N02P R000
1x2P Tin 0.8mm 50V 2 1 Surface Mount,Vertical -25℃~+85℃ SMD,P=0.8mm Headers, Male Pins RoHS
connection solution Ckmtw W-0800N06P-R000 pressure type bar connector with 0.8mm pitch and 50V rating
1x6P Tin 0.8mm 50V 6 1 Surface Mount,Vertical -25℃~+85℃ SMD,P=0.8mm Headers, Male Pins RoHS
Right angle connector strip ultra thin gold plated Ckmtw W-1253M05P-0420 1.25mm pitch designed for electrical and PCB
SMD,P=1.25mm,Surface Mount,Right Angle Headers, Male Pins RoHS
connector Ckmtw W-1251S02P-0200 with 3 amp current rating and temperature range minus 25 to 85 degrees
Connector Header 2 position 1.25mm Pitch
electrical connector strip Ckmtw W-1253M10P-0420 for AWG28 to 32 wire gauges and PC board thickness
SMD,P=1.25mm,Surface Mount,Right Angle Headers, Male Pins RoHS
Send RFQ
Stock:
MOQ:
