Ckmtw W0800N05PR000 08mm pitch connector designed for wire to board pressure type bar connections
Manufacturer:
Ckmtw
Description:
1x5P Tin 0.8mm 50V 5 1 Surface Mount,Vertical -25℃~+85℃ SMD,P=0.8mm Headers, Male Pins RoHS
Category:
Free Hanging, Panel Mount/Headers, Male Pins
Specifications
Pins Structure:
1x5P
Contact Plating:
锡
Pitch:
0.8mm
Contact Material:
磷铜;LCP
Voltage Rating (Max):
50V
Number Of PINs Per Row:
5
Number Of Rows:
1
Z-Height Of The Board:
2.75mm
Mounting Type:
立贴
Operating Temperature:
-25℃~+85℃
Mfr. Part #:
W-0800N05P-R000
Package:
SMD,P=0.8mm
Model Number:
W-0800N05P-R000
Introduction
Product Overview
This specification applies to 0.8mm spacing pressure-type bar connectors (SUH0.8). Designed for wire-to-board connections, these connectors offer a compact solution with a 0.8mm pitch.
Product Attributes
- Brand: SHENZHEN CANKEMENG INDUSTRIAL CO.LTD
- Origin: China (Manufacturing Base: JIANGXI CANKEMENG ELECTRONICS CO.LTD)
- Product Name: Wire-to-board connector / SUH0.8 / 0.8mm pitch / Vertical SMT
- Customer Part No: W-0800NXXP-R000
- Housing Material: LCP (Natural Color)
- Contact Material: Phosphor Copper
- Welding Slice Material: Phosphor Copper
- Plating: Nickel Base, High Tin
Technical Specifications
| Item | Specification | Requirement |
|---|---|---|
| Ratings and Applicable Wires | ||
| Rated Voltage (MAX) | 50V [AC (rms) / DC] | |
| Insulation O.D. | 0.5-0.6mm | |
| Rated Current (MAX) | AWG#30: 0.5A AWG#32: 0.5A | |
| Ambient Temperature Range | -25 +85 | |
| Performance | ||
| Contact Resistance | Measure by dry circuit, 20mV MAX, 10mA. | 20 milliohms MAX |
| On Crimped Portion: Measure by dry circuit, 20mV MAX, 10mA. | 5 milliohms MAX | |
| Insulation Resistance | Apply 100V DC between adjacent terminal or ground. | 100 Megohms MIN |
| Dielectric Strength | Apply 200V AC (rms) for 1 minute between adjacent terminal or ground. | No Breakdown |
| Mechanical Performance | ||
| Contact Retention Force (Min.) | Apply axial pull out force at a speed of 253mm/minute on the contact assembled in the housing. | 4-7N MIN |
| Terminal/Housing Retention Force | Apply axial pull out force at a speed of 253mm/minute on the contact assembled in the housing. | 4-7N MIN |
| Contact Insertion and Withdrawal Force | Insert and withdraw connectors with hand | Insertion Force: 1-2N/PIN |
| Withdrawal Force: 0.3N/PIN | ||
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at a speed rate of less than 10 cycles/minute | Contact Resistance: 60 mMAX |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX |
| Vibration | DC 1mA energized; sweep vibration along XYZ axes; Amplitude: 5mm P-P; Frequency: 10-55-10Hz/min; Duration: 2 hours in each axis. | Appearance: No Damage |
| Contact Resistance: 60 mMAX | ||
| Discontinuity: 1 ms.MAX. | ||
| Shock | DC 1mA energized; 490m/s {50G} shock; 3 strokes in each X,Y,Z axes. | Appearance: No Damage |
| Discontinuity: 1 ms.MAX. | ||
| Heat Resistance | 852, 96 hours; then return to room temperature for 1-2 hours. | Appearance: No Damage |
| Contact Resistance: 60 mMAX | ||
| Cold Resistance | -402, 96 hours; then return to room temperature for 1-2 hours. | Appearance: No Damage |
| Contact Resistance: 60 mMAX | ||
| Humidity | Temperature: 402; Relative Humidity: 90-94%; Duration: 96 Hours; then return to room temperature for 0.5 hours. | Appearance: No Damage |
| Contact Resistance: 60 mMAX | ||
| Dielectric Strength: Must meet 4.1.3 | ||
| Insulation Resistance: 20 M MIN | ||
| Temperature Cycling | 5 cycles of: a) -253 30 minutes b) 852 30 minutes | Appearance: No Damage |
| Contact Resistance: 60 mMAX | ||
| Salt Spray | 24 hours exposure to a salt spray from 51% solution at 352. After test, wash with room temp water and dry. | Appearance: No Damage, Corrosion |
| Contact Resistance: 60 mMAX | ||
| SO2 Gas Resistance | 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 60 mMAX |
| NH3 Gas Resistance | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Appearance: No Damage |
| Contact Resistance: 60 mMAX | ||
| Solderability | Soldering Time: 20.5 sec. Soldering Temperature: 2355. 0.2 mm from terminal tip. | Solder Wetting: Apply Area More Than 95% |
| Resistance to Soldering Heat | Soldering Time: 50.5 sec. Soldering Temperature: 2555. 0.2 mm from terminal tip. | Appearance: No Damage, Deformation |
Soldering Conditions (Pb-free)
| Parameter | Specification |
|---|---|
| Average temperature gradient in preheating | 2.5C/s |
| Soak time (tsoak) | 2-3 minutes |
| Time above 150C (T1) | 60s |
| Time above 180C (T2) | 50s |
| Time above 250C (T3) | 2-5s |
| Peak temperature in reflow (Tpeak) | 255C (0/+5C) |
| Temperature gradient in cooling | Max -5C/s |
| Time above 230C | 2010 sec |
| Pre-Heat | 9030 sec |
Note: This profile is the minimum requirement for evaluating soldering heat resistance of components. Heat transfer method used for reflow soldering is hot air convection. The actual air temperatures used to achieve the specified profile are higher and largely dependent on the reflow equipment.
2508121550_Ckmtw-W-0800N05P-R000_C50314167.pdf
Related Products
Connector Ckmtw W-2510R02P-0000 offering excellent electrical properties for various industrial uses
Connector Header 2 position 2.54mm Pitch Right Angle
Connector Ckmtw W-1251R06P-0200 with Metal H62 Y2 Brass Tin Plated and Plastic PA66 UL94V 0 Material
Connector Header 6 position 1.25mm Pitch Right Angle
Durable Connector Ckmtw W-1251S15P-0201 with Brass Tin Plated Metal and Flame Retardant PA66 Plastic
Connector Header 15 position 1.25mm Pitch
Durable Wire to Board Connector Ckmtw W-0800M05P-R000 Featuring 0.8mm Pitch Pressure Type Bar Design
1x5P Tin 0.8mm 50V 5 1 Surface Mount, Right Angle -25℃~+85℃ SMD,P=0.8mm,Surface Mount,Right Angle Headers, Male Pins RoHS
Durable 0.8mm pitch pressure type bar connector Ckmtw W-0800M09P-R000 for wire to board applications
1x9P Tin 0.8mm 50V 9 1 Surface Mount, Right Angle -25℃~+85℃ SMD,P=0.8mm,Surface Mount,Right Angle Headers, Male Pins RoHS
Surface Mount Wire to Board Connector SUH0.8 Series 0.8mm Pitch Rated Voltage 50V Ckmtw W 0800N02P R000
1x2P Tin 0.8mm 50V 2 1 Surface Mount,Vertical -25℃~+85℃ SMD,P=0.8mm Headers, Male Pins RoHS
connection solution Ckmtw W-0800N06P-R000 pressure type bar connector with 0.8mm pitch and 50V rating
1x6P Tin 0.8mm 50V 6 1 Surface Mount,Vertical -25℃~+85℃ SMD,P=0.8mm Headers, Male Pins RoHS
Right angle connector strip ultra thin gold plated Ckmtw W-1253M05P-0420 1.25mm pitch designed for electrical and PCB
SMD,P=1.25mm,Surface Mount,Right Angle Headers, Male Pins RoHS
connector Ckmtw W-1251S02P-0200 with 3 amp current rating and temperature range minus 25 to 85 degrees
Connector Header 2 position 1.25mm Pitch
electrical connector strip Ckmtw W-1253M10P-0420 for AWG28 to 32 wire gauges and PC board thickness
SMD,P=1.25mm,Surface Mount,Right Angle Headers, Male Pins RoHS
Send RFQ
Stock:
MOQ:
