Dual contact side connector 0.3mm pitch SMT termination DIANWEI 8.03A0.051200 suitable for 0.2mm thick FFC FPC cables
Manufacturer:
DIANWEI
Description:
FFC/FPC Connector 51 Position 0.3mm Pitch Double-Sided Contacts, Top and Bottom Entry -40℃~+80℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-40℃~+80℃
Number Of Contacts:
51P
Pitch:
0.3mm
Contact Type:
双侧触点/上下接
FFC, FCB Thickness:
0.2mm
Contact Plating:
金
Contact Material:
铜合金
Mfr. Part #:
8.03A0.051200
Package:
SMD,P=0.3mm,Surface Mount,Right Angle
Model Number:
8.03A0.051200
Introduction
Product Overview
0.3mm pitch dual contact side connector (H=0.9mm) with back lock mechanism, designed for 0.2mm thick FFC/FPC cables (9-61 pin). This connector features dual contact for enhanced reliability and a back lock design for secure mating. It is suitable for SMT processes.
Product Attributes
- Brand: DIANWEI
- Origin: Dongguan, China
- Certifications: IATF16949, ISO9001:2015, ISO14001, National High-Tech Enterprise
Technical Specifications
| Spec | Value | Description |
| Series | 8.03A | 0.3mm FFC/FPC dual contact side connector (H=0.9mm) |
| Pitch | 0.3mm | |
| Height (H) | 0.9mm | |
| Applicable FFC/FPC Thickness | 0.2mm 0.02mm | |
| Pin Positions | See drawing | |
| Contact Type | Dual contact | |
| Termination Type | SMT | |
| Coplanarity | 0.10mm MAX | |
| Operation Temperature | -40 ~ +85 | Without ice or dew |
| Operation Humidity | 20-85RH | |
| Storage Temperature | -10 ~ +50 | Without ice or dew |
| Storage Humidity | 20 ~ 85%RH | |
| Rating Voltage | 30V (AC/DC) | |
| Rating Current | 0.2A / PIN | At ambient temperature 20 |
| Housing Material | LCP Nature Color | UL 94V-0 |
| Cover Material | PA/PPS Black | UL 94V-0 |
| Terminal Material | Copper Alloy | |
| Stator Material | Copper Alloy | |
| Plating Spec. | Gold plating 1~3u" | Contact area and solder area, see drawing |
| Contact Resistance | 100m Max | Mate applicable FPC, measure by dry circuit, 20mV Max. DC, 1mA. |
| Insulation Resistance | 50M MIN | Apply 100V DC 1Minutes between adjacent terminals. |
| Dielectric Strength | No Damage/Shorting | Apply 100V AC 1Minutes between adjacent terminals. |
| Retention Force of single Pin | 0.2N / PIN MIN | Apply axial pull out force at the rate of 25~100mm/Min. |
| Retention force of GND Pin | 0.3N / PIN MIN | Apply axial pull out force at the rate of 25~100mm/Min. |
| Retention force of FFC/FPC | 0.2N Min/Pin | Insert FFC into connector, apply axial pull out force at the rate of 20~100mm/Min. (PIN X 0.2N Min) |
| Shock Test | 1sec Max. of discontinuity ok, Contact resistance 100m MAX, No Damage | Acceleration 490m/s, lasting 11ms, 3 times for each of 6 directions. |
| Vibration Test | 1sec Max. of discontinuity ok, Contact resistance 100m MAX, No Damage | Amplitude: 1.52mm, Frequency: 10~55~10Hz in 1 minute, X/Y/Z directions for 2 hours each. |
| Durability (Lock/Dis-lock) | 100m MAX of Contact resistance ok, No Damage | 20 times with loading. |
| Heat Resistance Test | 1sec Max. of discontinuity ok, Contact resistance 100m MAX, No damage, Retention force 0.2N/Pin | Expose to 852 for 96H, conditioned at ambient for 1H. |
| Humidity Test | 1sec Max. of discontinuity ok, Contact Resistance: 100m Max, Insulation Resistance: 50 M Min, Dielectric: No damage, Shorting, Visual ok | Expose to 403, 90~95% RH for 96H, conditioned at ambient for 1H. |
| High/Low Temperature Cycle Test | 1sec Max. of discontinuity ok, Contact Resistance: 100 m Max, Visual ok, Retention force 0.2N/Pin | 5 cycles based on table, conditioned at ambient for 1H. |
| Salt Spray Test (Gold Plating) | No Corrosion | Expose to 5% salt water density at 351 for 24H. |
| Solderability | Soldering tail easy wetting, Tin cover > 90% | Dip soldering tail into Tin oven at 2455 for 3sec. |
| Resistance to Soldering Heat | Contact resistance 100m Max., no damage, Retention force 0.2N/Pin | Preheat: 150~180 60~120s, Peak temp: 2505, over 230 last 305s. |
| Recommended Soldering Profile | Refer to document | Preheat: 150~180 60~120s, Peak temp: 2505, over 225 last 30 5s. Lock cover must be opened. |
2410121646_DIANWEI-8-03A0-051200_C19188832.pdf
Related Products
0.5mm Pitch Dual Contact Side Connector for FFC FPC Cable Applications DIANWEI 8.01A0.054200 Series
FFC/FPC Connector 54 Position 0.5mm Pitch Double-Sided Contacts, Top and Bottom Entry -40℃~+80℃
0.5mm pitch FFC FPC dual contact side connector DIANWEI 8.01A0.018200 with 2.0mm height and 4 to 60 pins
FFC/FPC Connector 18 Position 0.5mm Pitch Double-Sided Contacts, Top and Bottom Entry -40℃~+80℃
Dual contact side connector 0.3mm pitch DIANWEI 8.03A0.013200 rear locking suitable for 0.2mm thick FFC FPC cables
FFC/FPC Connector 13 Position 0.3mm Pitch Double-Sided Contacts, Top and Bottom Entry -40℃~+80℃
Side connector with dual contact and rear locking DIANWEI 8.03A0.061200 supporting 0.2mm thick FFC FPC cables 9 to 61 pins
FFC/FPC Connector 61 Position 0.3mm Pitch Double-Sided Contacts, Top and Bottom Entry -40℃~+80℃
Dual Contact Side Connector SMT Soldering 0.5mm Pitch for 0.3mm FFC FPC Cables DIANWEI 8.01A0.024200
FFC/FPC Connector 24 Position 0.5mm Pitch Double-Sided Contacts, Top and Bottom Entry -40℃~+80℃
FFC FPC Connector 0.5mm Pitch Swing Cover Type DIANWEI 8.15A0.004200 Supports 4 to 128 Pin Cable Widths
FFC/FPC Connector 4 Position 0.5mm Pitch Bottom Contact
1.0mm pitch FFC FPC dual contact side connector DIANWEI 8.04A0.014200 with 2.0mm height and back locking
FFC/FPC Connector 14 Position 1mm Pitch Double-Sided Contacts, Top and Bottom Entry -40℃~+80℃
Secure 0.5mm Pitch Dual Contact Side Connector DIANWEI 8.01A0.015200 for Flexible Printed Circuits
FFC/FPC Connector 15 Position 0.5mm Pitch Double-Sided Contacts, Top and Bottom Entry -40℃~+80℃
0.5mm Pitch FFC FPC Swing Cover Connector DIANWEI 8.15A0.008200 Supporting 4 to 128 Pins Application
FFC/FPC Connector 8 Position 0.5mm Pitch Bottom Contact
0.5mm pitch dual contact side connector DIANWEI 8.01A0.042200 designed for FFC FPC cable connections
FFC/FPC Connector 42 Position 0.5mm Pitch Double-Sided Contacts, Top and Bottom Entry -40℃~+80℃
Send RFQ
Stock:
MOQ:
