USB connector hanxia HX AF 90 ZJDG JB offering robust connection and insulation resistance properties
Manufacturer:
hanxia
Description:
Through Hole USB, DVI, HDMI Connector Assemblies RoHS
Category:
USB, DVI, HDMI Connector Adapters/USB, DVI, HDMI Connector Assemblies
Specifications
Mfr. Part #:
HX AF 90 ZJDG JB
Package:
Through Hole
Model Number:
HX AF 90 ZJDG JB
Introduction
Product Overview
The HX AF 90ZJDG JB is a USB connector manufactured by Shenzhen Hanxia Electronic Co., Ltd. It is designed for use within a practical temperature range of -25C to 85C.
Product Attributes
- Brand: (Shenzhen Hanxia Electronic Co., Ltd)
- Origin: China
- Model: HX AF 90ZJDG JB
Technical Specifications
| Item | Project | Test Conditions | Performance | Specification |
| Mechanical | Connection Force | Measured after connecting and disconnecting using standard plug gauge 3 times. | 35N MAX | |
| Disconnection Force | Measured after connecting and disconnecting using standard plug gauge 3 times. | 8N MIN | ||
| Terminal Strength | A static load of 0.1N/m (1kgf/cm) shall be applied to the tip of the terminal for 1 min in any direction. There shall be no damage to the terminal such as cracks, looseness or play. Electrical, and mechanical characteristics shall be satisfied. | |||
| Electrical | Contact Resistance | Measured at small current (100mA or less) 1000Hz | 30m MAX | |
| Insulation Resistance | Apply a voltage of 100V DC for 1 min to following portions after which measurement shall be made: (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted | 1000M MIN | ||
| Dielectric Strength | AC 500V ims (50~60Hz) for 1 min Trip Current: 0.5mA (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted. Without damage to parts arcing or breakdown etc. | |||
| Durability | Solderability Test | The top of the terminals shall be dipped 1mm in the solder bath of 2505 for 50.5 seconds. (1) Solder wetting time shall be 3 sec or less (2) The area of soldering should be over 75% | ||
| Resistance to Soldering Heat Test (Reflow Soldering) | Preheat: Temperature on the copper foil surface should reach 180, 120s after the P.C.B entered into the soldering equipment. Tallest temperature: Temperature on the copper foil surface should reach the peak temperature of 2605 with in 20 seconds. Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | |||
| Resistance to Soldering Heat Test (Soldering Iron Method) | Bit temperature 3305 Application time of soldering iron 30.5 sec. However excessive pressure shall not be applied to the terminal. Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | |||
| Humidity Test | The jack shall be stored at a temperature of 402 and a humidity of 90% to 96% for 96 Hr, then the jack shall be maintained at standard atmospheric condition for 1 Hr for other procedures. | Appearance no abnormality, mechanical and electrical characteristics shall be satisfied. | ||
| Heat Test | The jack shall be stored at a temperature of 702 for 96 hours, and then it shall be subjected to the controlled recovery measurement. Appearance no abnormality, mechanical and electrical characteristics shall be satisfied. | |||
| Cold Test | The jack shall be stored at a temperature of -253 for 96 hours and then it shall be subjected to the controlled recovery conditions for 1 hour after which. Appearance no abnormality, mechanical and electrical characteristics shall be satisfied. | |||
| Life Test (Without Load) | Connection and disconnection shall be made with the mating plugs and jacks for 5000 cycles at a speed of 10 to 25 cycles/min. | (1) Contact Resistance 0.1 (2) Disconnection Force 0.8 to 2.0N (3) Mechanical and electrical characteristics shall be satisfied. | ||
| Life Test (Load) | Connection and disconnection shall be made 5000 cycles at a speed 10 to 20 cycles / min at rating condition (non-inductive load). | (1) Contact Resistance 0.1 (2) Disconnection Force 0.8 to 2.0N (3) Mechanical and electrical characteristics shall be satisfied. | ||
| Temperature Cycling Test | The jack shall be subjected to 5 cycles of the following conditions showed in the figure, and then shall be returned allowed to remain in room ambient condition for 30 minutes. | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 100VAC/MIN (between terminals). | ||
| Cold & Heat Shock Test | The jack shall be subjected to 5 cycles of the following conditions showed in the figure, and then shall be returned and allowed to remain in room ambient condition for 30 minutes. | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 25N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 500VAC/MIN (between terminals). |
2410121438_hanxia-HX-AF-90-ZJDG-JB_C7430438.pdf
Related Products
Electronic Connector hanxia HX MICRO 180D ZB Featuring Nickel Base and Gold Plated Contact Terminal
USB-Micro B Receptacle Connector Through Hole
Durable hanxia HX 10.0 180 ZCZB USB connector rated DC 30V 1.5A for industrial applications
USB-A (USB TYPE-A) Receptacle Connector 4 Position Through Hole
Temperature resistant USB cable Hanxia HX 10.0 4C6.3 JB rated DC 30V 1.5A for electrical connection
USB-A (USB TYPE-A) Receptacle Connector 4 Position Right Angle
USB component hanxia HX 10.0 HCHTZB6.3 tested for connection force and performance in pressure range 86 to 106 Kpa
SMD USB, DVI, HDMI Connector Assemblies RoHS
HX MICRO 7.2 JBWZ Micro USB connector offering low contact resistance and high insulation resistance
USB-Micro B Receptacle Connector Surface Mount, Right Angle
Durable hanxia HX MICRO 2PCB1.6 ZB Micro USB connector with tested mechanical and electrical specifications
USB-Micro B Receptacle Connector Recessed Mount
Micro USB Connector Hanxia HX MICRO 4PCB1.0 JB with C5191 Nickel Base and Gold Plated Contact Terminal
USB-Micro B Receptacle Connector Recessed Mount
Micro USB Connector Hanxia HX MICRO DNJ JB with Durable Plastic and Gold Plated Contact Terminals
USB-Micro B Receptacle Connector Surface Mount, Right Angle
Electrical connector hanxia HX AM 90D with plated gold contacts in mating area and tin on solder tails
USB-A (USB TYPE-A) Receptacle Connector 4 Position Through Hole
Micro USB hanxia HX 10.0 4JCHT6.3 product specification with temperature humidity and pressure tolerance
USB-A (USB TYPE-A) Receptacle Connector 4 Position Surface Mount, Right Angle
Send RFQ
Stock:
MOQ:
