USB connector hanxia HX TYPE-C 16P L9.5 featuring gold plated terminals and LCP housing for power delivery
Manufacturer:
hanxia
Description:
USB-C (USB TYPE-C) Receptacle Connector 16 Position Surface Mount, Right Angle
Category:
USB, DVI, HDMI Connector Adapters/USB, DVI, HDMI Connector Assemblies
Specifications
Number Of Ports:
1
Supplementary Features:
-
Number Of Contacts:
16P
Mounting Type:
卧贴
Center Height:
1.68mm
Current Rating:
3A
Voltage Rating:
20V
Detection Color:
黑色
Operating Temperature:
-30℃~+80℃
Connector Type:
Type-C
Gender:
母
Connect-Disconnect Life:
1万次
Mfr. Part #:
HX TYPE-C 16P L9.5
Package:
SMD
Model Number:
HX TYPE-C 16P L9.5
Introduction
Product Overview
The HX TYPE-C 16P L9.5 is a high-quality USB Type-C connector designed for reliable electrical and mechanical performance. It features a robust construction with LCP housing, C2680 terminals with nickel and gold plating, and a stainless steel shell. This connector is suitable for a wide range of applications requiring stable power delivery and data transmission, with a rated voltage of 20V DC and a rated current of 3A.
Product Attributes
- Brand: HX
- Origin: Shenzhen Hanxia Electronic Co., Ltd
- Material (Housing): LCP UL94 V-0
- Material (Terminal): C2680, T=0.2mm; Nickel base, Gold plated
- Material (Shell): Stainless Steel 201-H, Nickel plated
- Color: Not specified
- Certifications: Not specified
Technical Specifications
| Item | Specification | Test Conditions |
|---|---|---|
| Electrical Characteristics | ||
| Rated Voltage | 20V DC | |
| Rated Current | 3A (VBUS pins); 1.25A (GND pins); 0.25A (other pins) | |
| Contact Resistance | 40m Max | 20mV, 100mA |
| Insulation Resistance | 100M Min | DC 100V, 1 min |
| Dielectric Strength | 100V AC rms (50-60Hz) for 1 min | Trip Current: 0.5mA; Between body and conductor, between conductors not to be contact, between conductors not to be when plug is inserted |
| Mechanical Performance | ||
| Insertion Force | 0.5-2.0 Kgf | Measured after connecting and disconnecting using standard plug gauge 3 times |
| Withdrawal Force | 0.6-2.0 Kgf | Measured after connecting and disconnecting using standard plug gauge 3 times |
| Terminal Strength | No damage such as cracks, looseness or play; Satisfy electrical and mechanical characteristics | Static load of 0.1N/m (1kgf/cm) applied to the tip for 1 min in any direction |
| Durability | ||
| Solderability Test | Solder wetting time 3 sec; Soldering area > 75% | Terminals dipped 1mm in solder bath at 2505 for 50.5 sec |
| Resistance to Soldering Heat Test (Reflow) | No deformation of case or excessive looseness of terminals; Satisfy electrical characteristics | Preheat: 180 for 120s; Peak temperature: 2605 within 20 sec |
| Resistance to Soldering Heat Test (Iron) | No deformation of case or excessive looseness of terminals; Satisfy electrical characteristics | Bit temperature 3305, application time 30.5 sec; No excessive pressure applied |
| Humidity Test | No damage on appearance; Satisfy mechanical and electrical characteristics | 402, 90%-96% humidity for 96 Hr, then 1 Hr at standard atmospheric conditions |
| Heat Test | No damage on appearance; Satisfy mechanical and electrical characteristics | 702 for 96 hours, then 1 Hr at room temperature |
| Cold Test | No damage on appearance; Satisfy mechanical and electrical characteristics | -253 for 96 hours, then 1 Hr at room temperature |
| Life Test (Without Load) | Contact Resistance 0.1; Withdrawal Force 0.8-2.0N; Satisfy mechanical and electrical characteristics | 10000 cycles at a speed of 10 to 25 cycles/min |
| Life Test (With Load) | Contact Resistance 0.1; Withdrawal Force 0.8-2.0N; Satisfy mechanical and electrical characteristics | 10000 cycles at a speed of 10 to 20 cycles/min (Rating condition, non-inductive load) |
| Temperature Cycling Test | No deformation or cracks in molded part; Insertion & Extraction Force: 3 to 20N; Contact Resistance: Max.30m; Insulation Resistance: Min.100 M; Dielectric Withstanding Voltage: 100VAC/min (Between terminals) | 5 cycles of specified temperature profile (-40 to 80) |
| Cold & Heat Shock Test | No deformation or cracks in molded part; Insertion & Extraction Force: 3 to 25N; Contact Resistance: Max.30m; Insulation Resistance: Min.100 M; Dielectric Withstanding Voltage: 500VAC/min (Between terminals) | 5 cycles of specified temperature profile (-20 to 70) |
| Environmental | ||
| Operating Temperature Range | -30 to +80 |
2501071651_hanxia-HX-TYPE-C-16P-L9-5_C41427494.pdf
Related Products
Electronic Connector hanxia HX MICRO 180D ZB Featuring Nickel Base and Gold Plated Contact Terminal
USB-Micro B Receptacle Connector Through Hole
Durable hanxia HX 10.0 180 ZCZB USB connector rated DC 30V 1.5A for industrial applications
USB-A (USB TYPE-A) Receptacle Connector 4 Position Through Hole
Temperature resistant USB cable Hanxia HX 10.0 4C6.3 JB rated DC 30V 1.5A for electrical connection
USB-A (USB TYPE-A) Receptacle Connector 4 Position Right Angle
USB component hanxia HX 10.0 HCHTZB6.3 tested for connection force and performance in pressure range 86 to 106 Kpa
SMD USB, DVI, HDMI Connector Assemblies RoHS
USB connector hanxia HX AF 90 ZJDG JB offering robust connection and insulation resistance properties
Through Hole USB, DVI, HDMI Connector Assemblies RoHS
HX MICRO 7.2 JBWZ Micro USB connector offering low contact resistance and high insulation resistance
USB-Micro B Receptacle Connector Surface Mount, Right Angle
Durable hanxia HX MICRO 2PCB1.6 ZB Micro USB connector with tested mechanical and electrical specifications
USB-Micro B Receptacle Connector Recessed Mount
Micro USB Connector Hanxia HX MICRO 4PCB1.0 JB with C5191 Nickel Base and Gold Plated Contact Terminal
USB-Micro B Receptacle Connector Recessed Mount
Micro USB Connector Hanxia HX MICRO DNJ JB with Durable Plastic and Gold Plated Contact Terminals
USB-Micro B Receptacle Connector Surface Mount, Right Angle
Electrical connector hanxia HX AM 90D with plated gold contacts in mating area and tin on solder tails
USB-A (USB TYPE-A) Receptacle Connector 4 Position Through Hole
Send RFQ
Stock:
MOQ:
