Precision engineered hanxia HX AM 90 YC USB connector rated DC 30V 1.5A for electronic connections
Manufacturer:
hanxia
Description:
1 4P -25℃~+85℃ SMD USB, DVI, HDMI Connector Assemblies RoHS
Category:
USB, DVI, HDMI Connector Adapters/USB, DVI, HDMI Connector Assemblies
Specifications
Number Of Ports:
1
Supplementary Features:
鱼叉脚
Number Of Contacts:
4P
Mounting Type:
直插
Current Rating:
1.5A
Detection Color:
黑色
Voltage Rating:
30V
Operating Temperature:
-25℃~+85℃
Gender:
母
Mfr. Part #:
HX AM 90 YC
Package:
SMD
Model Number:
HX AM 90 YC
Introduction
Product Specification for Approval
This document outlines the specifications for the HX AM 90YC USB connector, designed for reliable performance within a specified temperature range and standard atmospheric conditions. It details mechanical, electrical, and durability characteristics to ensure product quality and adherence to industry standards.
Product Attributes
- Brand: Hanxia Electronic Co., Ltd ()
- Origin: Shenzhen, China
- Color: 0.9 Gray
- Model Type: 1U HX AM 90YC USB
Technical Specifications
| Item | Test Conditions | Performance Specification |
|---|---|---|
| RATING | ||
| PRACTICAL TEMPERATURE RANGE | -25~85C | |
| RATING () | DC 30V 1.5A | |
| STANDARD ATMOSPHEIC CONDITIONS | ||
| Temperature | 5C TO 35 | |
| Humidity | 45% TO 85% | |
| Pressure | 86Kpa TO 106Kpa | |
| MECHANICAL | ||
| 1. CONNECTION FORCE | After connecting and disconnecting using standard plug gauge 3 times | 3.57Kgf MAX |
| 2. DISCONNECTION FORCE | After connecting and disconnecting using standard plug gauge 3 times | 1.02Kgf MIN |
| 3. TERMINAL STRENGTH | Static load of 0.1N/m (1kgf/cm) applied to the tip for 1 min in any direction | No damage, satisfies electrical and mechanical characteristics |
| ELECTRICAL | ||
| 3.1 CONTACT RESISTANCE | Measured at small current (100mA or less), 1000Hz | 30m MAX |
| 3.2 INSULATION RESISTANCE | Apply 100V DC for 1 min (between body and conductor, between non-contacting conductors, between non-contacting conductors when plug is inserted) | 1000M MIN |
| 3.3 DIELECTRIC STRENGTH | AC 500V rms (50~60Hz) for 1 min, trip current: 0.5mA (between body and conductor, between non-contacting conductors, between non-contacting conductors when plug is inserted) | No damage, arcing or breakdown |
| DURABILITY | ||
| 4.1 SOLDERABILITY TEST | Terminals dipped 1mm in solder bath at 2505 for 50.5 seconds | (1) Solder wetting time 3 sec (2) Soldering area > 75% |
| 4.2 RESISTANCE TO SOLDERING HEAT TEST | Reflow soldering conditions: Preheat to 180, peak temperature 2605 within 20 seconds | No deformation of case or excessive looseness of terminals, satisfies electrical characteristics |
| Soldering iron method: Bit temperature 3305, application time 30.5 seconds, no excessive pressure on terminals | No deformation of case or excessive looseness of terminals, satisfies electrical characteristics | |
| 4.3 HUMIDITY TEST | Stored at 402 and 90% to 96% humidity for 96 hr, then maintained at standard atmospheric conditions for 1 hr | - |
| 4.4 HEAT TEST | Stored at 702 for 96 hours, then subjected to controlled recovery for 1 hour | No damage on appearance, satisfies mechanical and electrical characteristics |
| 4.5 COLD TEST | Stored at -253 for 96 hours, then subjected to controlled recovery for 1 hour | No damage on appearance, satisfies mechanical and electrical characteristics |
| 4.6 LIFE TEST | With load: 5000 cycles at 10 to 20 cycles/min at rating condition (non-inductive load) | (1) Contact resistance 0.1 (2) Disconnection force 0.8 to 2.0N (3) Satisfies mechanical and electrical characteristics |
| Without load: 5000 cycles at 10 to 25 cycles/min with mating plugs and jacks | - | |
| 4.7 TEMPERATURE CYCLING TEST | 5 cycles of specified temperature conditions, then 30 minutes in room ambient | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals). |
| 4.8 COLD & HEAT SHOCK TEST | 5 cycles of specified temperature conditions, then 30 minutes in room ambient | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 25N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). |
2410121438_hanxia-HX-AM-90-YC_C7430296.pdf
Related Products
Electronic Connector hanxia HX MICRO 180D ZB Featuring Nickel Base and Gold Plated Contact Terminal
USB-Micro B Receptacle Connector Through Hole
Durable hanxia HX 10.0 180 ZCZB USB connector rated DC 30V 1.5A for industrial applications
USB-A (USB TYPE-A) Receptacle Connector 4 Position Through Hole
Temperature resistant USB cable Hanxia HX 10.0 4C6.3 JB rated DC 30V 1.5A for electrical connection
USB-A (USB TYPE-A) Receptacle Connector 4 Position Right Angle
USB component hanxia HX 10.0 HCHTZB6.3 tested for connection force and performance in pressure range 86 to 106 Kpa
SMD USB, DVI, HDMI Connector Assemblies RoHS
USB connector hanxia HX AF 90 ZJDG JB offering robust connection and insulation resistance properties
Through Hole USB, DVI, HDMI Connector Assemblies RoHS
HX MICRO 7.2 JBWZ Micro USB connector offering low contact resistance and high insulation resistance
USB-Micro B Receptacle Connector Surface Mount, Right Angle
Durable hanxia HX MICRO 2PCB1.6 ZB Micro USB connector with tested mechanical and electrical specifications
USB-Micro B Receptacle Connector Recessed Mount
Micro USB Connector Hanxia HX MICRO 4PCB1.0 JB with C5191 Nickel Base and Gold Plated Contact Terminal
USB-Micro B Receptacle Connector Recessed Mount
Micro USB Connector Hanxia HX MICRO DNJ JB with Durable Plastic and Gold Plated Contact Terminals
USB-Micro B Receptacle Connector Surface Mount, Right Angle
Electrical connector hanxia HX AM 90D with plated gold contacts in mating area and tin on solder tails
USB-A (USB TYPE-A) Receptacle Connector 4 Position Through Hole
Send RFQ
Stock:
MOQ:
