electrical mechanical durability performance hanxia HX 10.0 QCHTJB6.3 product specification document
Manufacturer:
hanxia
Description:
SMD USB, DVI, HDMI Connector Assemblies RoHS
Category:
USB, DVI, HDMI Connector Adapters/USB, DVI, HDMI Connector Assemblies
Specifications
Mfr. Part #:
HX 10.0 QCHTJB6.3
Package:
SMD
Model Number:
HX 10.0 QCHTJB6.3
Introduction
Product Overview
This specification document outlines the technical details and performance standards for the HX 10.0 QCHTJB6.3 product from Shenzhen Hanxia Electronic Co., Ltd. It covers electrical, mechanical, and durability characteristics, ensuring reliable performance within a specified operating temperature range.
Product Attributes
- Brand: Hanxia
- Origin: Shenzhen, China
- Model: HX 10.0 QCHTJB6.3
- Customer Approval Signatures: Huang Bin, Zhang Wei, Luo Xiaochun
- Manufacturer: Shenzhen Hanxia Electronic Co., Ltd
- Contact: Tel: 0755-33819206, Fax: 0755-27597491
Technical Specifications
| Item | Test Conditions | Performance | |||
| RATING | DC 30V 1.5A | ||||
| PRACTICAL TEMPERATURE RANGE: -25~85C | |||||
| STANDARD ATMOSPHERIC CONDITIONS | (1) Temperature: 5 TO 35 | ||||
| (2) Humidity: 45% TO 85% | |||||
| (3) Pressure: 86Kpa TO 106Kpa | |||||
| MECHANICAL | CONNECTION FORCE | MEASUREMENT SHALL BE MADE AFTER CONNECTING AND DISCONNECTING USING STANDARD PLUG GAUGE 3 TIMES | 3.57Kgf MAX | ||
| DISCONNECTION FORCE | MEASUREMENT SHALL BE MADE AFTER CONNECTING AND DISCONNECTING USING STANDARD PLUG GAUGE 3 TIMES | 1.02Kgf MIN | |||
| TERMINAL STRENGTH | A STATIC LOAD OF 0.1N/m(1kgf/cm)SHALL BE APPLIED TO THE TIP OF THE TERMINAL FOR 1 MIN IN ANY DIRECTION | THERE SHALL BE NO DAMAGE TO THE TERMINAL SUCH AS CRACKS, LOOSENESS OR PLAY ELECTRICAL ,AND MECHANICAL CHARACTERISTICS SHALL BE SATISFIED | |||
| ELECTRICAL | CONTACT RESISTANCE | MEASURED AT SMALL CURRENT 100m A OR LESS 1000Hz | 30m MAX | ||
| INSULATION RESISTANCE | APPLY A VOLTAGE OF 100V DC FOR 1 MIN TO FOLLOWING PORTIONS | 1000M MIN | |||
| DIELECTRIC STRENGTH | AC 500V ims(50~60Hz)FOR 1 MIN TRIP CURRENT:0.5mA | WITHOUT DAMAGE TO PARTS ARCING OR BREAKDOWN ETC | |||
| DURABILITY | SOLDERA- BILITY TEST | THE TOP OF THE TERMINALS SHALL BE DIPPED 1mm IN THE SOLDER BATH OF 2505 FOR 50.5 SECONDS | 1SOLDER WETTING TIME SHALL BE 3 SEC OR LESS 2THE AREA OF SOLDERING SHOULD BE OVER 75% | ||
| RESISTANCE TO SOLDERING HEAT TEST (REFLOW SOLDERING CONDITIONS) | PREHEAT:180.120, TALLEST TEMPERATURE:2605 WITHIN 20 SECONDS. | WITHOUT DEFOR MATION OF CASE OR EXCESSIVE LOOSENESS OF TEMINALS ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED | |||
| RESISTANCE TO SOLDERING HEAT TEST (SOLDERING IRON METHOD) | BIT TEMPERATURE 3305 APPLICATION TIME OF SOLDERING IRON 30.5 SEC | WITHOUT DEFORMATION OF CASE OR EXCESSIVE LOOSENESS OF TEMINALS ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED | |||
| HUMIDITY TEST | STORED AT 402 AND 90%TO 96% HUMIDITY FOR 96 Hr, THEN MAINTAINED AT STANDARD ATMOSPHERIC CONDITION FOR 1 Hr | APPEARANCE AND CHARACTERISTICS SHALL BE SATISFIED | |||
| HEAT TEST | STORED AT 702 FOR 96 HOURS, THEN RECOVERED AT ROOM TEMPERATURE FOR 1 HOUR | APPEARANCE AND CHARACTERISTICS SHALL BE SATISFIED | |||
| COLD TEST | STORED AT -253 FOR 96 HOURS, THEN RECOVERED AT ROOM TEMPERATURE FOR 1 HOUR | APPEARANCE AND CHARACTERISTICS SHALL BE SATISFIED | |||
| LIFE TEST | WITH LOAD (NON-INDUCTIVE LOAD) | CONNECTION AND DISCONNECTION 5000 CYCLES AT 10 TO 20 CYCLES / MIN | 1 CONTACT RESISTANCE SHALL BE 0.1 2 DISCONNECTION FORCE SHALL BE 0.8 TO 2.0N 3 MECHANICAL AND ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED | ||
| WITHOUT LOAD | CONNECTION AND DISCONNECTION 5000 CYCLES AT 10 TO 25 CYCLES/MIN | ||||
| TEMPARATURE CYCLING TEST | 5 CYCLES OF 70 (0.5 Hr) -> ROOM TEMP (0.5 Hr) -> -40 (1 Hr) -> ROOM TEMP (0.5 Hr) | THERE SHALL BE NO DEFORMATION OR CRACKS IN MOLDED PART. INSERTION EXTRACTION FORCE:3 TO 20N, CONTACT RESISTANCE:MAX.30M, INSULATION RESISTANCE: MIN.100 M, DIELECTRIC WITHSTANDING VOLTAGE: 100VAC/MIN | |||
| FOLLOWED BY 30 MINUTES IN ROOM AMBIENT CONDITION | |||||
| COLD&HEAT SHOCK TEST | 5 CYCLES OF 70 (0.5 Hr) -> -20 (1 Hr) -> ROOM TEMP (0.5 Hr) | THERE SHALL BE NO DEFORMATION OR CRACKS IN MOLDED PART. INSERTION EXTRACTION FORCE:3 TO 25N, CONTACT RESISTANCE:MAX.30M, INSULATION RESISTANCE: MIN.100 M, DIELECTRIC WITHSTANDING VOLTAGE: 500VAC/MIN | |||
| FOLLOWED BY 30 MINUTES IN ROOM AMBIENT CONDITION | |||||
2410121438_hanxia-HX-10-0-QCHTJB6-3_C7430289.pdf
Related Products
Electronic Connector hanxia HX MICRO 180D ZB Featuring Nickel Base and Gold Plated Contact Terminal
USB-Micro B Receptacle Connector Through Hole
Durable hanxia HX 10.0 180 ZCZB USB connector rated DC 30V 1.5A for industrial applications
USB-A (USB TYPE-A) Receptacle Connector 4 Position Through Hole
Temperature resistant USB cable Hanxia HX 10.0 4C6.3 JB rated DC 30V 1.5A for electrical connection
USB-A (USB TYPE-A) Receptacle Connector 4 Position Right Angle
USB component hanxia HX 10.0 HCHTZB6.3 tested for connection force and performance in pressure range 86 to 106 Kpa
SMD USB, DVI, HDMI Connector Assemblies RoHS
USB connector hanxia HX AF 90 ZJDG JB offering robust connection and insulation resistance properties
Through Hole USB, DVI, HDMI Connector Assemblies RoHS
HX MICRO 7.2 JBWZ Micro USB connector offering low contact resistance and high insulation resistance
USB-Micro B Receptacle Connector Surface Mount, Right Angle
Durable hanxia HX MICRO 2PCB1.6 ZB Micro USB connector with tested mechanical and electrical specifications
USB-Micro B Receptacle Connector Recessed Mount
Micro USB Connector Hanxia HX MICRO 4PCB1.0 JB with C5191 Nickel Base and Gold Plated Contact Terminal
USB-Micro B Receptacle Connector Recessed Mount
Micro USB Connector Hanxia HX MICRO DNJ JB with Durable Plastic and Gold Plated Contact Terminals
USB-Micro B Receptacle Connector Surface Mount, Right Angle
Electrical connector hanxia HX AM 90D with plated gold contacts in mating area and tin on solder tails
USB-A (USB TYPE-A) Receptacle Connector 4 Position Through Hole
Send RFQ
Stock:
MOQ:
