Durable connector hanxia HX TYPE-C 14P LT H10.0 rated 20V 3A operating temperature minus 30C to 80C
Manufacturer:
hanxia
Description:
USB-C (USB TYPE-C) Receptacle Connector 14 Position Through Hole
Category:
USB, DVI, HDMI Connector Adapters/USB, DVI, HDMI Connector Assemblies
Specifications
Number Of Ports:
1
Supplementary Features:
-
Number Of Contacts:
14P
Mounting Type:
立贴
Center Height:
-
Current Rating:
3A
Voltage Rating:
20V
Detection Color:
黑色
Operating Temperature:
-30℃~+80℃
Connector Type:
Type-C
Gender:
母
Connect-Disconnect Life:
1万次
Mfr. Part #:
HX TYPE-C 14P LT H10.0
Package:
SMD
Model Number:
HX TYPE-C 14P LT H10.0
Introduction
Product Specification
This document outlines the specifications for the HX TYPE-C 14P LT H10.0 connector manufactured by Shenzhen Hanxia Electronic Co., Ltd. It details the product's electrical, mechanical, and durability characteristics, along with standard testing conditions.
Product Attributes
- Brand: (Shenzhen Hanxia Electronic Co., Ltd)
- Product Name: TYPE-C
- Part Number: HX TYPE-C 14P LT H10.0
- Origin: (Shenzhen)
- Rated Voltage: 20V
- Rated Current: 3A
- Operating Temperature Range: -30C to 80C
Technical Specifications
| Item | Test Conditions | Performance Specification |
| Mechanical Properties | ||
| Connection Force | Measurement after connecting and disconnecting using standard plug gauge 3 times. | 0.5-2.0 Kgf |
| Disconnection Force | Measurement after connecting and disconnecting using standard plug gauge 3 times. | 0.6-2.0 Kgf |
| Terminal Strength | A static load of 0.1N/m (1kgf/cm) applied to the tip of the terminal for 1 min in any direction. No damage to the terminal such as cracks, looseness or play. Electrical and mechanical characteristics shall be satisfied. | N/A |
| Electrical Properties | ||
| Contact Resistance | Measured at small current (100mA or less) at 1000Hz. | 30m MAX |
| Insulation Resistance | Apply a voltage of 100V DC for 1 min to specified portions. | 100M MIN |
| Dielectric Strength | AC 100V (50Hz)/min voltage for 1 minute, sensitivity current 0.5mA. Tested between specified portions. No insulation breakdown. | 100VAC ims (50~60Hz) for 1 min, Trip current: 0.5mA |
| Durability | ||
| Solderability Test | Top of terminals dipped 1mm in solder bath of 2505 for 50.5 seconds. | Solder wetting time 3 sec. Soldering area > 75%. |
| Resistance to Soldering Heat Test (Reflow) | Preheat: 180 for 120s. Peak temperature: 2605 within 20 seconds. | No deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. |
| Resistance to Soldering Heat Test (Soldering Iron) | Bit temperature 3305, application time 30.5 seconds. No excessive pressure on terminals. | No deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. |
| Humidity Test | Stored at 402 and 90%-96% humidity for 96 hours, then maintained at standard atmospheric conditions for 1 hour. | N/A |
| Heat Test | Stored at 702 for 96 hours, then subjected to controlled recovery for 1 hour. | No damage on appearance. Mechanical and electrical characteristics shall be satisfied. |
| Cold Test | Stored at -253 for 96 hours, then subjected to controlled recovery for 1 hour. | No damage on appearance. Mechanical and electrical characteristics shall be satisfied. |
| Life Test (Without Load) | Connection and disconnection for 10000 cycles at a speed of 10 to 25 cycles/min. | N/A |
| Life Test (With Load) | At rating condition (non-inductive load), connection and disconnection for 10000 cycles at a speed of 10 to 20 cycles/min. | Contact Resistance 0.1. Disconnection Force 0.8 to 2.0N. Mechanical and electrical characteristics shall be satisfied. |
| Temperature Cycling Test | 5 cycles of specified conditions, then allowed to remain in room ambient for 30 minutes. | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max.30m. Insulation Resistance: Min.100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals). |
| Cold & Heat Shock Test | 5 cycles of specified conditions, then allowed to remain in room ambient for 30 minutes. | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 25N. Contact Resistance: Max.30m. Insulation Resistance: Min.100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). |
2501071651_hanxia-HX-TYPE-C-14P-LT-H10-0_C32713313.pdf
Related Products
Electronic Connector hanxia HX MICRO 180D ZB Featuring Nickel Base and Gold Plated Contact Terminal
USB-Micro B Receptacle Connector Through Hole
Durable hanxia HX 10.0 180 ZCZB USB connector rated DC 30V 1.5A for industrial applications
USB-A (USB TYPE-A) Receptacle Connector 4 Position Through Hole
Temperature resistant USB cable Hanxia HX 10.0 4C6.3 JB rated DC 30V 1.5A for electrical connection
USB-A (USB TYPE-A) Receptacle Connector 4 Position Right Angle
USB component hanxia HX 10.0 HCHTZB6.3 tested for connection force and performance in pressure range 86 to 106 Kpa
SMD USB, DVI, HDMI Connector Assemblies RoHS
USB connector hanxia HX AF 90 ZJDG JB offering robust connection and insulation resistance properties
Through Hole USB, DVI, HDMI Connector Assemblies RoHS
HX MICRO 7.2 JBWZ Micro USB connector offering low contact resistance and high insulation resistance
USB-Micro B Receptacle Connector Surface Mount, Right Angle
Durable hanxia HX MICRO 2PCB1.6 ZB Micro USB connector with tested mechanical and electrical specifications
USB-Micro B Receptacle Connector Recessed Mount
Micro USB Connector Hanxia HX MICRO 4PCB1.0 JB with C5191 Nickel Base and Gold Plated Contact Terminal
USB-Micro B Receptacle Connector Recessed Mount
Micro USB Connector Hanxia HX MICRO DNJ JB with Durable Plastic and Gold Plated Contact Terminals
USB-Micro B Receptacle Connector Surface Mount, Right Angle
Electrical connector hanxia HX AM 90D with plated gold contacts in mating area and tin on solder tails
USB-A (USB TYPE-A) Receptacle Connector 4 Position Through Hole
Send RFQ
Stock:
MOQ:
