Robust hanxia HX 10.0 180 ZCZB-HJ electronic component designed for within specified temperature and humidity ranges
Manufacturer:
hanxia
Description:
USB-A (USB TYPE-A) Receptacle Connector 4 Position Through Hole
Category:
USB, DVI, HDMI Connector Adapters/USB, DVI, HDMI Connector Assemblies
Specifications
Number Of Ports:
1
Number Of Contacts:
4P
Mounting Type:
直插
Current Rating:
1.5A
Operating Temperature:
-25℃~+85℃
Connector Type:
Type-A
Gender:
母
Mfr. Part #:
HX 10.0 180 ZCZB-HJ
Package:
Through Hole
Model Number:
HX 10.0 180 ZCZB-HJ
Introduction
Product Overview
This document outlines the specifications for the HX 10.0 180ZCZB-HJ product from Shenzhen Hanxia Electronic Co., Ltd. It details the product's rating, operating temperature range, and performance criteria under standard atmospheric conditions. The specifications cover mechanical, electrical, and durability aspects, ensuring the product meets stringent quality standards for various applications.
Product Attributes
- Brand: HX
- Origin: Shenzhen Hanxia Electronic Co., Ltd.
Technical Specifications
| Item | Test Conditions | Performance/Specification |
| RATING | ||
| Rated Value | DC 30V 1.5A | |
| PRACTICAL TEMPERATURE RANGE | ||
| Operating Temperature | -25~85C | Within -25C~+85C temperature |
| STANDARD ATMOSPHERIC CONDITIONS | ||
| Temperature | 5C TO 35 | |
| Humidity | 45% TO 85% | |
| Pressure | 86Kpa TO 106Kpa | |
| MECHANICAL | ||
| Connection Force | After connecting and disconnecting using standard plug gauge 3 times | 3.57Kgf MAX |
| Disconnection Force | After connecting and disconnecting using standard plug gauge 3 times | 1.02Kgf MIN |
| Terminal Strength | A static load of 0.1N/m (1kgf/cm) applied to the tip of the terminal for 1 min in any direction | No damage to the terminal such as cracks, looseness or play; mechanical and electrical characteristics shall be satisfied. |
| ELECTRICAL | ||
| Contact Resistance | Measured at small current (100mA or less) at 1000Hz | 30m MAX |
| Insulation Resistance | Apply a voltage of 100V DC for 1 min to specified portions | 1000M MIN |
| Dielectric Strength | AC 500V rms (50~60Hz) for 1 min, trip current: 0.5mA (between specified portions) | No insulation breakdown, arcing, etc. |
| DURABILITY | ||
| Solderability Test | Top of terminals dipped 1mm in solder bath of 2505 for 50.5 seconds | (1) Solder wetting time 3 sec (2) Soldering area > 75% |
| Resistance to Soldering Heat Test (Reflow Soldering) | Preheat: Surface temp reaches 180, 120s after PCB enters equipment. | Case without deformation, terminals with no excessive looseness, electrical characteristics satisfied. |
| Peak Temp: Surface temp reaches 2605 within 20 seconds. | ||
| Resistance to Soldering Heat Test (Soldering Iron) | Bit temp 3305, application time 30.5 sec (no excessive pressure on terminal) | Case without deformation, terminals with no excessive looseness, electrical characteristics satisfied. |
| Humidity Test | Stored at 402 and 90% to 96% humidity for 96 Hr, then maintained at standard atmospheric condition for 1 Hr | Appearance no abnormal; mechanical and electrical characteristics satisfied. |
| Heat Test | Stored at 702 for 96 hours, then recovered at room temperature for 1 hour | Appearance no abnormal; mechanical and electrical characteristics satisfied. |
| Cold Test | Stored at -253 for 96 hours, then recovered at room temperature for 1 hour | Appearance no abnormal; mechanical and electrical characteristics satisfied. |
| Life Test | Load: At rating condition (non-inductive load), 5000 cycles at 10 to 20 cycles/min | (1) Contact Resistance 0.1 (2) Disconnection Force 0.8 to 2.0N (3) Other: Mechanical and electrical characteristics satisfied. |
| Without Load: 5000 cycles at 10 to 25 cycles/min | ||
| (With mating plugs and jacks) | ||
| Temperature Cycling Test | 5 cycles of specified conditions, then 30 minutes in room ambient. | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals). |
| Temp: 70 (0.5 Hr) -> 40 (1 Hr) -> -20 (0.5 Hr) -> 0 (1 Hr) | ||
| Cycle: 1 cycle | ||
| Total Hours per cycle: 3 Hr | ||
| Cold & Heat Shock Test | 5 cycles of specified conditions, then 30 minutes in room ambient. | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 25N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). |
| Temp: 70 (0.5 Hr) -> -20 (0.5 Hr) | ||
| Cycle: 1 cycle | ||
| Total Hours per cycle: 1 Hr | ||
2410121438_hanxia-HX-10-0-180-ZCZB-HJ_C7430283.pdf
Related Products
Electronic Connector hanxia HX MICRO 180D ZB Featuring Nickel Base and Gold Plated Contact Terminal
USB-Micro B Receptacle Connector Through Hole
Durable hanxia HX 10.0 180 ZCZB USB connector rated DC 30V 1.5A for industrial applications
USB-A (USB TYPE-A) Receptacle Connector 4 Position Through Hole
Temperature resistant USB cable Hanxia HX 10.0 4C6.3 JB rated DC 30V 1.5A for electrical connection
USB-A (USB TYPE-A) Receptacle Connector 4 Position Right Angle
USB component hanxia HX 10.0 HCHTZB6.3 tested for connection force and performance in pressure range 86 to 106 Kpa
SMD USB, DVI, HDMI Connector Assemblies RoHS
USB connector hanxia HX AF 90 ZJDG JB offering robust connection and insulation resistance properties
Through Hole USB, DVI, HDMI Connector Assemblies RoHS
HX MICRO 7.2 JBWZ Micro USB connector offering low contact resistance and high insulation resistance
USB-Micro B Receptacle Connector Surface Mount, Right Angle
Durable hanxia HX MICRO 2PCB1.6 ZB Micro USB connector with tested mechanical and electrical specifications
USB-Micro B Receptacle Connector Recessed Mount
Micro USB Connector Hanxia HX MICRO 4PCB1.0 JB with C5191 Nickel Base and Gold Plated Contact Terminal
USB-Micro B Receptacle Connector Recessed Mount
Micro USB Connector Hanxia HX MICRO DNJ JB with Durable Plastic and Gold Plated Contact Terminals
USB-Micro B Receptacle Connector Surface Mount, Right Angle
Electrical connector hanxia HX AM 90D with plated gold contacts in mating area and tin on solder tails
USB-A (USB TYPE-A) Receptacle Connector 4 Position Through Hole
Send RFQ
Stock:
MOQ:
