Durable USB product hanxia HX 10.0 QCHTJB6.8 rated DC 30V 1.5A suitable for temperature range minus 25 to 85 degrees
Manufacturer:
hanxia
Description:
SMD USB, DVI, HDMI Connector Assemblies RoHS
Category:
USB, DVI, HDMI Connector Adapters/USB, DVI, HDMI Connector Assemblies
Specifications
Mfr. Part #:
HX 10.0 QCHTJB6.8
Package:
SMD
Model Number:
HX 10.0 QCHTJB6.8
Introduction
Product Overview
This specification document outlines the requirements for the HX 10.0 QCHTJB6.8, a USB product from Shenzhen Hanxia Electronic Co., Ltd. It details the product's rating, operating conditions, and performance standards for mechanical, electrical, and durability testing.
Product Attributes
- Brand: Hanxia Electronic
- Origin: Shenzhen, China
- Model: HX 10.0 QCHTJB6.8
- Part No: QCHTJB6.8
- Customer Approval Signatures: Provided (specific names not detailed in output)
- Prepared By:
- Checked By:
- Approved By:
Technical Specifications
| Item | Project | Test Conditions | Performance | Specification |
| Rating | Rated Value | DC 30V 1.5A | ||
| Operating Temperature Range | -25~85C | Within -25C~+85C temperature | ||
| Standard Atmospheric Conditions | Temperature | 5C to 35 | ||
| Humidity | 45% to 85% | |||
| Pressure | 86Kpa to 106Kpa | |||
| Mechanical | Connection Force | After connecting and disconnecting using standard plug gauge 3 times | Measurement shall be made | 3.57Kgf MAX |
| Disconnection Force | After connecting and disconnecting using standard plug gauge 3 times | Measurement shall be made | 1.02Kgf MIN | |
| Terminal Strength | A static load of 0.1N/m (1kgf/cm) shall be applied to the tip of the terminal for 1 min in any direction | No damage to terminal such as cracks, looseness or play; electrical and mechanical characteristics shall be satisfied | ||
| Electrical | Contact Resistance | Measured at small current (100mA or less) at 1000Hz | 30m MAX | |
| Insulation Resistance | Apply a voltage of 100V DC for 1 min to specified portions | 1000M MIN | ||
| Dielectric Strength | AC 500V ims (50~60Hz) for 1 min, trip current: 0.5mA, applied to specified portions | Without damage to parts, arcing or breakdown etc. | ||
| Durability | Solderability Test | Top of terminals dipped 1mm in solder bath of 2505 for 50.5 seconds | (1) Solder wetting time shall be 3 seconds or less (2) The area of soldering should be over 75% | |
| Resistance to Soldering Heat Test (Reflow Soldering) | Preheat: 180, 120s; Peak temperature: 2605 within 20 seconds | No deformation of case or excessive looseness of terminals; electrical characteristics shall be satisfied | ||
| Resistance to Soldering Heat Test (Soldering Iron) | Bit temperature 3305, application time 30.5 seconds, no excessive pressure on terminal | No deformation of case or excessive looseness of terminals; electrical characteristics shall be satisfied | ||
| Humidity Test | Stored at 402 and 90% to 96% humidity for 96 Hr, then maintained at standard atmospheric condition for 1 Hr | |||
| Heat Test | Stored at 702 for 96 hours, then subjected to controlled recovery for 1 Hr | No damage on appearance; mechanical and electrical characteristics shall be satisfied | ||
| Cold Test | Stored at -253 for 96 hours, then subjected to controlled recovery for 1 Hr | No damage on appearance; mechanical and electrical characteristics shall be satisfied | ||
| Life Test | With Load (Non-inductive Load) | 5000 cycles at a speed of 10 to 20 cycles/min | (1) Contact Resistance 0.1 (2) Disconnection Force 0.8 to 2.0N (3) Mechanical and Electrical Characteristics shall be satisfied | |
| Without Load | 5000 cycles at a speed of 10 to 25 cycles/min | |||
| Temperature Cycling Test | 5 cycles of specified conditions (e.g., 70 for 0.5 hours, -20 for 0.5 hours) | No deformation or cracks in molded part; Insertion & Extraction Force: 3 to 20N; Contact Resistance: Max. 30m; Insulation Resistance: Min. 100 M; Dielectric Withstanding Voltage: 100VAC/min (between terminals) | ||
| Cold & Heat Shock Test | 5 cycles of specified conditions (e.g., 70 for 1 hour, -20 for 1 hour) | No deformation or cracks in molded part; Insertion & Extraction Force: 3 to 25N; Contact Resistance: Max. 30m; Insulation Resistance: Min. 100 M; Dielectric Withstanding Voltage: 500VAC/min (between terminals) |
2410121438_hanxia-HX-10-0-QCHTJB6-8_C7430290.pdf
Related Products
Electronic Connector hanxia HX MICRO 180D ZB Featuring Nickel Base and Gold Plated Contact Terminal
USB-Micro B Receptacle Connector Through Hole
Durable hanxia HX 10.0 180 ZCZB USB connector rated DC 30V 1.5A for industrial applications
USB-A (USB TYPE-A) Receptacle Connector 4 Position Through Hole
Temperature resistant USB cable Hanxia HX 10.0 4C6.3 JB rated DC 30V 1.5A for electrical connection
USB-A (USB TYPE-A) Receptacle Connector 4 Position Right Angle
USB component hanxia HX 10.0 HCHTZB6.3 tested for connection force and performance in pressure range 86 to 106 Kpa
SMD USB, DVI, HDMI Connector Assemblies RoHS
USB connector hanxia HX AF 90 ZJDG JB offering robust connection and insulation resistance properties
Through Hole USB, DVI, HDMI Connector Assemblies RoHS
HX MICRO 7.2 JBWZ Micro USB connector offering low contact resistance and high insulation resistance
USB-Micro B Receptacle Connector Surface Mount, Right Angle
Durable hanxia HX MICRO 2PCB1.6 ZB Micro USB connector with tested mechanical and electrical specifications
USB-Micro B Receptacle Connector Recessed Mount
Micro USB Connector Hanxia HX MICRO 4PCB1.0 JB with C5191 Nickel Base and Gold Plated Contact Terminal
USB-Micro B Receptacle Connector Recessed Mount
Micro USB Connector Hanxia HX MICRO DNJ JB with Durable Plastic and Gold Plated Contact Terminals
USB-Micro B Receptacle Connector Surface Mount, Right Angle
Electrical connector hanxia HX AM 90D with plated gold contacts in mating area and tin on solder tails
USB-A (USB TYPE-A) Receptacle Connector 4 Position Through Hole
Send RFQ
Stock:
MOQ:
