High Strength NETWORK CONNECTOR RCH RC00148 with Recycled PA46 Housing and Phosphor Copper Round Pins
Manufacturer:
RCH
Description:
Through Hole Modular/Ethernet Connector Jacks RoHS
Category:
Modular/Ethernet Connector Jacks/Modular/Ethernet Connector Jacks
Specifications
Mfr. Part #:
RC00148
Package:
Through Hole
Model Number:
RC00148
Introduction
Product Overview
This specification applies to NETWORK CONNECTORS used in electronic products. These connectors are designed for reliable electrical connections, featuring robust construction and adherence to stringent performance standards for electrical efficiency, mechanical strength, and environmental resistance.
Product Attributes
- Brand: Wenzhou Ruichuan Electronics Co., Ltd.
- Product Series: RJ45/RJ11 Connector Series
- Model Type: NETWORK CONNECTOR
- Version: AO
- Material (Housing): PA46 (Black)
- Material (Pin): Phosphor Copper
Technical Specifications
| Category | Parameter | Requirement Value | Manufacturer Specification Value | Manufacturer Test Value | Judgment Standard |
|---|---|---|---|---|---|
| Basic Specification | Hole Count | 1 | 1 | ||
| Angle | 90 | 90 | |||
| Material | Housing | PA46 (Black), Recycled Material 15% | PA46 (Black), Recycled Material 15% | ||
| Round Pin | Phosphor Copper =0.46mm (Au=FU"), Salt Spray 8H | Phosphor Copper =0.46mm (Au=FU"), Salt Spray 8H | |||
| Back Cover | PA46 (Black), Recycled Material 15% | PA46 (Black), Recycled Material 15% | |||
| Key Dimensions | Dimension 1 | 58.2 0.25mm | 58.2 0.25mm | 58.25 | |
| Dimension 2 | 53.34 0.25mm | 53.34 0.25mm | 53.3 | ||
| Dimension 3 | 11.7 0.15mm | 11.7 0.15mm | 11.72 | ||
| Dimension 4 | 17.75 0.15mm | 17.75 0.15mm | 17.76 | ||
| Dimension 5 | 3.3 0.25mm | 3.3 0.25mm | 3.35 | ||
| Common Dimensions | Dimension 6 | 8.89 0.15mm | 8.89 0.15mm | 8.89 | |
| Dimension 7 | 2.54 0.15mm | 2.54 0.15mm | 2.54 | ||
| Dimension 8 | 7.65 0.15mm | 7.65 0.15mm | 7.67 | ||
| Dimension 9 | 2.9 0.1mm | 2.9 0.1mm | 2.95 | ||
| Dimension 10 | 1.65 0.1mm | 1.65 0.1mm | 1.66 | ||
| Electrical Performance | Rated Voltage | 125V | 125V | Normal operation at 125V, no obvious temperature rise. | |
| Rated Current | 1.5A | 1.5A | Normal operation at 1.5A, no obvious temperature rise. | ||
| Contact Resistance | < 0.03 | < 0.03 | Maximum 0.03. | ||
| Insulation Resistance | > 100 M (DC500V, 1min) | > 100 M (DC500V, 1min) | Minimum 100M. | ||
| Withstand Voltage | AC500V (1min) | AC500V (1min) | No dielectric breakdown. | ||
| Reliability | Insertion Force | 330N | 330N | Product Average: 12.5N | Judgment Standard: 330N. (Frequency: 12.5mm/min, uniform speed, with matching plug) |
| Extraction Force | 330N | 330N | Product Average: 10.2N | Judgment Standard: 330N. (Frequency: 12.5mm/min, uniform speed, with matching plug) | |
| Plug/Unplug Life | 750 cycles | 750 cycles | Conditions: No load, 8-10 cycles/min. 1. Insertion/Extraction Force: 3~30N. 2. Contact Resistance: < 0.03. | ||
| Heat Resistance | Test after 48 hours at 852 environment, then 30 min in normal environment. | Test after 48 hours at 852 environment, then 30 min in normal environment. | 1. Contact Resistance: < 0.03. 2. Insulation Resistance: > 100 M. 3. No signs of mechanical or electrical damage. | ||
| Solder Heat Resistance | 230, 5S | 230, 5S | 1. Plastic housing should not deform, terminals should not detach after test. 2. Mechanical and electrical characteristics should be met. | ||
| Salt Mist | 8 hours (35, 5%, PH6.57.2) | 8 hours (35, 5%, PH6.57.2) | 1. No obvious signs of rust on appearance. | ||
| Operating Temperature | -4070 | -4070 | 1. No obvious damage to the appearance of the socket within the specified temperature range. | ||
| Storage Temperature & Humidity | a. Temperature: -5~30; b. Relative Humidity: 20%~75% | a. Temperature: -5~30; b. Relative Humidity: 20%~75% | 1. Contact Resistance: < 0.03. 2. Insulation Resistance: > 100 M. 3. No signs of mechanical or electrical damage. | ||
| Storage Period | 0.8 years | 0.8 years | Store under conditions of cleanliness, ventilation, no corrosive gases, away from partitions, and off the ground. | ||
| General Specification (from other section) | Current Rating | 1.5A DC / Contact, 20mA DC for LED signals | |||
| Voltage Rating | 125V AC / Contact, 2.0 volts DC for LED signals | ||||
| Operating Environment (Standard) | -20+70 | ||||
| Operating Environment (Industrial) | -40+85 (According to customer request) | ||||
| Humidity (Operating) | 2070% | ||||
| Storage Environment Temperature | -40 to +85 | ||||
| Storage Environment Humidity | 20%70% | ||||
| Test Environment Temperature | +20+30 | ||||
| Test Environment Humidity | 25%65% | ||||
| Test Environment Atmospheric Pressure | 86-106KPA | ||||
| Electrical Efficiency | Withstand Voltage | 500V (AC 50/60Hz RMS) for 1 minute, Leakage current 0.5mA MAX. | No dielectric breakdown shall occur. | ||
| Insulation Resistance | 100 M MIN. (Using a 500 volts DC meter) | ||||
| Contact Resistance | 30 M MIN. (across a pair of mated contacts, 20mV, 100mA max) | ||||
| Mechanical Efficiency | Insertion Force | Below 20N | With the rate of 20-30 times/minute, averagely. | ||
| Extraction Force | Below 20N | With the rate of 20-30 times/minute, averagely. | |||
| Terminal Strength | Withstand a force of 1-4N for 10 seconds. | Without loosing and breakdown, deformation of terminal is accepted. | |||
| Durability | Lifetest | 750 cycles | Contact resistance: 30m MIN. (Rate: 20 to 30 cycles per minutes) | The jack will not be destroyed. | |
| Solderability | Resistance to soldering heat test | Temperature of solder: 2603. Dip time: 51 seconds. | Housing shall not be transmutation, contact shall not be pull out from housing. Shall comply with Electrical and Mechanical efficiency. | ||
| Environment Test | Cold Test | Subjected to -252 for 96 hours, then conditioned at room ambient for 30 minutes. | |||
| Heat Test | Subjected to 702 for 96 hours, then conditioned at room ambient for 30 minutes. | ||||
| Humidity Test | Subjected to 402 and 90%-95% RH for 96 hours, then conditioned at room ambient for 30 minutes. | ||||
| Soldering Test | Resistance to soldering heat test | Temperature of solder: 2453. Time of dip: 30.5 seconds. Length of dip: 2.0 mm. | Areas of soldering shall be capable of 95% or more of dip terminal area. Appearance shall not be changed obviously. Contact resistance: 50m max. Withstand voltage: AC 500V. | ||
| Salt Mist Test | 8 hours | Appearance shall not be extremely rust. |
2410121256_RCH-RC00148_C7423242.pdf
Related Products
network connector RCH RC00110 featuring plastic seat and phosphor copper pin for durable electronic devices
Through Hole Modular/Ethernet Connector Jacks RoHS
NETWORK CONNECTOR RCH RC00120 Offering Electrical Performance with Phosphor Copper Pins and PA46 Material
Jack Modular Connector Through Hole
Network connector RCH RC00102 designed for electrical connections in various electronic applications
RJ45 Jack Unshielded 1 Through Hole Non-LED Through Hole Modular/Ethernet Connector Jacks RoHS
NETWORK CONNECTOR RCH RC00124 Featuring RJ45 RJ11 Socket PA46 Black Housing and Phosphor Copper Pins
Through Hole Modular/Ethernet Connector Jacks RoHS
Industrial fan RCH RC00417 designed to provide consistent airflow and quiet operation in industrial
Jack Modular Connector RJ45 Through Hole, Right Angle Unshielded
Durable network connector RCH RC00107 with 10 millimeter key dimension and gold plated pin material
RJ45 Jack Unshielded 1 Through Hole Through Hole Modular/Ethernet Connector Jacks RoHS
Internal RJ45 connector with spring loaded mechanism and LED indicators yellow housing RCH RC02515
Jack Modular Connector RJ45 Through Hole, Right Angle Unshielded
Network Socket RJ45 Connector with LED Lights and Durable Phosphor Bronze Contacts Model RCH RC00116
Jack Modular Connector RJ45 Through Hole Unshielded
Durable network connector series featuring RCH RC00129 model with RJ45 RJ11 sockets and electrical performance
Through Hole Modular/Ethernet Connector Jacks RoHS
electronic network connector RCH RC00111 featuring PA46 black housing and phosphor copper pin design
RJ45 Jack Unshielded 1 Through Hole Non-LED Through Hole Modular/Ethernet Connector Jacks RoHS
Send RFQ
Stock:
MOQ:
