network connector RCH RC00110 featuring plastic seat and phosphor copper pin for durable electronic devices
Manufacturer:
RCH
Description:
Through Hole Modular/Ethernet Connector Jacks RoHS
Category:
Modular/Ethernet Connector Jacks/Modular/Ethernet Connector Jacks
Specifications
Mfr. Part #:
RC00110
Package:
Through Hole
Model Number:
RC00110
Introduction
NETWORK CONNECTOR
Product Description
This specification applies to NETWORK CONNECTORS used in electronic products. These connectors are designed for reliable electrical connections, offering stable performance under specified voltage and current ratings. They are suitable for various electronic product applications requiring secure and durable interfacing.
Product Attributes
- Brand: Wenzhou Ruichuan Electronics Co., Ltd.
- Series: RJ45/RJ11 Connector Series
- Model Type: NETWORK CONNECTOR
- Version: AO
- Material: Plastic seat: PA46 (Black); Round pin: Phosphor copper =0.46mm (Au=FU");
Technical Specifications
| Category | Parameter Name | Requirement Value | Manufacturer Specification Value | Manufacturer Test Value | Test Condition | Performance/Judgment Standard |
|---|---|---|---|---|---|---|
| Basic Specification | Hole Count | 1 | 1 | - | - | - |
| Angle | 180 | 180 | - | - | - | |
| Material | Plastic Seat | PA46 (Black) | PA46 (Black) | - | - | - |
| Round Pin | Phosphor copper =0.46mm (Au=FU") | Phosphor copper =0.46mm (Au=FU") | - | - | - | |
| Structural Dimensions | Key Dimension 1 | 15.40.15mm | 15.40.15mm | 15.43 | - | - |
| Key Dimension 2 | 16.50.15mm | 16.50.15mm | 16.53 | - | - | |
| Key Dimension 3 | 11.430.15mm | 11.430.15mm | 11.43 | - | - | |
| Key Dimension 4 | 16.000.15mm | 16.000.15mm | 16.03 | - | - | |
| Key Dimension 5 | 16.30.15mm | 16.30.15mm | 16.26 | - | - | |
| Key Dimension 6 | 3.10.2mm | 3.10.2mm | 3.21 | - | - | |
| Common Dimension 7 | 2.540.15mm | 2.540.15mm | 2.54 | - | - | |
| Common Dimension 8 | 8.890.15mm | 8.890.15mm | 8.89 | - | - | |
| Common Dimension 9 | 6.50.15mm | 6.50.15mm | 6.53 | - | - | |
| Common Dimension 10 | 3.00.1mm | 3.00.1mm | 3.05 | - | - | |
| Common Dimension 11 | 1.270.10mm | 1.270.10mm | 1.27 | - | - | |
| Common Dimension 12 | 8.890.15mm | 8.890.15mm | 8.89 | - | - | |
| Common Dimension 13 | 10.90.15mm | 10.90.15mm | 10.95 | - | - | |
| Common Dimension 14 | 15.40.15mm | 15.40.15mm | 15.45 | - | - | |
| Electrical Performance | Rated Voltage | 125V | 125V | - | - | Socket operates normally at rated voltage of 125V without obvious temperature rise. |
| Rated Current | 1.5A | 1.5A | - | - | Socket operates normally at rated current of 1.5A without obvious temperature rise. | |
| Contact Resistance | <0.03 | <0.03 | - | - | Maximum is 0.03 | |
| Insulation Resistance | >100 M (DC500V, 1min) | >100 M (DC500V, 1min) | - | - | Minimum is 100M | |
| Withstand Voltage | AC500V (1min) | AC500V (1min) | - | - | No dielectric breakdown occurs. | |
| Reliability | Insertion Force | 330N (at a frequency of 12.5mm per minute, uniform speed, with matching plug) | 330N (at a frequency of 12.5mm per minute, uniform speed, with matching plug) | Product average: 12.5N; Judgment Standard: 330N | - | - |
| Extraction Force | 330N (at a frequency of 12.5mm per minute, uniform speed, with matching plug) | 330N (at a frequency of 12.5mm per minute, uniform speed, with matching plug) | Product average: 10.2N; Judgment Standard: 330N | - | - | |
| Insertion/Extraction Lifespan | 750 cycles (at a speed of 8-10 times per minute under no-load conditions) | 750 cycles (at a speed of 8-10 times per minute under no-load conditions) | 1. Insertion and extraction force values are 330N. 2. Contact resistance is less than 0.03. | - | - | |
| Heat Resistance | Test after placing in an environment of 852 for 48 hours, then in a normal environment for 30 minutes. | Test after placing in an environment of 852 for 48 hours, then in a normal environment for 30 minutes. | 1. Contact resistance below 0.03. 2. Insulation resistance above 100M. 3. No signs of mechanical or electrical performance damage. | - | - | |
| Solder Heat Resistance | 230, 5S | 230, 5S | 1. The plastic base should not deform after testing, and terminals should not detach. 2. Mechanical and electrical characteristics should be met. | - | - | |
| Salt Spray | 8 hours (35, 5%, PH6.57.2) | 8 hours (35, 5%, PH6.57.2) | 1. No obvious signs of rust on the appearance. | - | - | |
| Operating Temperature | -4070 | -4070 | 1. No obvious damage to the appearance of the socket within the required temperature range. | - | - | |
| Storage Environment | Temperature | -5~30 | -5~30 | - | - | - |
| Relative Humidity | 20%~75% | 20%~75% | - | - | - | |
| Storage Period | 0.8 years (Stored under conditions of cleanliness, ventilation, no corrosive gas, partition, and off the ground) | 0.8 years (Stored under conditions of cleanliness, ventilation, no corrosive gas, partition, and off the ground) | - | - | - | |
| General Specification (from ModelType: NETWORK CONNECTOR) | Current Rating | 1.5A DC / Contact, 20mA DC for LED signals | - | - | - | - |
| Voltage Rating | 125V AC / Contact, 2.0 volts DC for LED signals | - | - | - | - | |
| Operating Environment Standard Temperature | -20+70 | - | - | - | - | |
| Operating Environment Industrial Temperature | -40+85 (According to customer request) | - | - | - | - | |
| Electrical Efficiency (from ModelType: NETWORK CONNECTOR) | Withstand voltage | No dielectric breakdown shall occur. | - | - | 500V (AC 50/60Hz RMS) between mutually insulated pin contacts for one minute, Leakage current 0.5mA MAX. | - |
| Insulation resistance | 100 M MIN. | - | - | Using a 500 volts DC insulation resistance meter between mutually insulated terminals or metallic parts. | - | |
| Contact resistance | 30 M MIN. | - | - | Measurement across a pair of mated contacts (20mV, 100mA max), for AC the frequency below 2KHz. | - | |
| Mechanical Efficiency (from ModelType: NETWORK CONNECTOR) | Insertion and Extraction Force | Insertion force is below 20N, extraction force is below 20N. (remove lock part) | - | - | Insertion and extraction with the rate of 20-30 times/1 minute averagely. | - |
| Terminal Strength | Without loosing and breakdown, but deformation of terminal is accepted. | - | - | Every terminal shall be capable of withstand a force of 1-4N (About 0.1-0.5kgf) for 10 seconds. | - | |
| Durability (from ModelType: NETWORK CONNECTOR) | Lifetest | Product will not be destroyed. Contact resistance: 30m MIN. | - | - | 750 cycles of insertion and extraction with mated plug, at a rate of 20 to 30 cycles per minutes. | - |
| Solderability (from ModelType: NETWORK CONNECTOR) | Resistance to soldering heat test | The jack's appearance: housing shall not be transmutation, contact shall not be pull out from housing. The jack shall comply with paragraphs Electrical efficiency and Mechanical efficiency. | - | - | Temperature of solder: 2603. Dip time: 51 seconds. | - |
| Soldering test | Areas of soldering shall be capable of 95% or more of dip terminal area. Appearance shall not be changed obviously. Contact resistance: 50m max. Withstand voltage: AC 500V. | - | - | Temperature of solder: 245 3N. Time of dip: 3 0.5 seconds. Length of dip: 2.0 mm (from end of terminal). | - | |
| Environment Test (from ModelType: NETWORK CONNECTOR) | Cold test | - | - | - | The jack shall be subjected to temperature of -25 2 for a period of 96 hours, then shall be allowed to remain in room ambient conditions for 30 minutes. | - |
| Heat test | - | - | - | The jack shall be subjected to temperature of 70 2 for a period of 96 hours, then shall be allowed to remain in room ambient conditions for 30 minutes. | - | |
| Humidity test | - | - | - | The jack shall be subjected to temperature of 40 2 and relative humidity of 90% to 95% for a period of 96 hours. Upon completion of the exposure, dew drops shall be blown out and removed from the jack, after which the jack shall be conditioned at room ambient conditions for 30 minutes. | - | |
| Salt mist test | Appearance shall not be extremely rust. | - | - | Testing bath: The temperature shall be 35 2 in the ambient of the jack during the test. Salt water: The concentration of the salt water shall be adjusted at 5 1% weight ratio at 35 2. Testing time: 8 hours. | - |
Note: Test and measurement conditions: Temperature: 5C-35C, relative humidity: 45%-85%, atmospheric pressure: 86kPa-106kPa. For doubt resolution: Temperature: 20 2C, relative humidity: 60%-70%, atmospheric pressure: 86kPa-106kPa.
Language Preference: Chinese is preferential in case of doubt in interpretation.
2409271733_RCH-RC00110_C7423189.pdf
Related Products
NETWORK CONNECTOR RCH RC00120 Offering Electrical Performance with Phosphor Copper Pins and PA46 Material
Jack Modular Connector Through Hole
Network connector RCH RC00102 designed for electrical connections in various electronic applications
RJ45 Jack Unshielded 1 Through Hole Non-LED Through Hole Modular/Ethernet Connector Jacks RoHS
NETWORK CONNECTOR RCH RC00124 Featuring RJ45 RJ11 Socket PA46 Black Housing and Phosphor Copper Pins
Through Hole Modular/Ethernet Connector Jacks RoHS
Industrial fan RCH RC00417 designed to provide consistent airflow and quiet operation in industrial
Jack Modular Connector RJ45 Through Hole, Right Angle Unshielded
Durable network connector RCH RC00107 with 10 millimeter key dimension and gold plated pin material
RJ45 Jack Unshielded 1 Through Hole Through Hole Modular/Ethernet Connector Jacks RoHS
Internal RJ45 connector with spring loaded mechanism and LED indicators yellow housing RCH RC02515
Jack Modular Connector RJ45 Through Hole, Right Angle Unshielded
Network Socket RJ45 Connector with LED Lights and Durable Phosphor Bronze Contacts Model RCH RC00116
Jack Modular Connector RJ45 Through Hole Unshielded
Durable network connector series featuring RCH RC00129 model with RJ45 RJ11 sockets and electrical performance
Through Hole Modular/Ethernet Connector Jacks RoHS
electronic network connector RCH RC00111 featuring PA46 black housing and phosphor copper pin design
RJ45 Jack Unshielded 1 Through Hole Non-LED Through Hole Modular/Ethernet Connector Jacks RoHS
Network Connector RCH RC00130 Featuring 180 Degree Angle and Green Yellow LED for Electronic Devices
Jack Modular Connector Through Hole
Send RFQ
Stock:
MOQ:
