Durable network connector RCH RC00107 with 10 millimeter key dimension and gold plated pin material
Specifications
Connector Type:
RJ45插座
Shielding:
无屏蔽
PoE:
不带PoE
Number Of Ports:
1
Mounting Type:
直插
Mfr. Part #:
RC00107
Package:
Through Hole
Model Number:
RC00107
Introduction
Product Overview
This specification applies to NETWORK CONNECTORS used in electronic products. These connectors are designed for electrical applications, offering reliable performance with specified electrical, mechanical, and durability characteristics. They are suitable for various electronic product applications.
Product Attributes
- Brand: Wenzhou Ruichuan Electronics Co., Ltd.
- Product Series: RJ45/RJ11 Connector Series
- Model Type: NETWORK CONNECTOR
- Version: AO
- Plastic Seat Material: PBT (Black)
- Pin Material: Phosphor Copper (=0.46mm, Au=FU")
Technical Specifications
| Category | Parameter Name | Required Value | Manufacturer Specification Value | Manufacturer Test Value |
|---|---|---|---|---|
| Basic Specification | Hole Count | 1 | 1 | |
| Angle | 180 | 180 | ||
| Structural Dimensions | Key Dimension 1 | 13.60.15mm | 13.60.15mm | 13.59 |
| Key Dimension 2 | 16.60.15mm | 16.60.15mm | 16.53 | |
| Key Dimension 3 | 10.000.15mm | 10.000.15mm | 9.96 | |
| Key Dimension 4 | 2.80.1mm | 2.80.1mm | 2.79 | |
| Key Dimension 5 | 15.90.5mm | 15.90.5mm | 15.89 | |
| Key Dimension 6 | 15.750.15mm | 15.750.15mm | 15.68 | |
| Key Dimension 7 | 3.650.25mm | 3.650.25mm | 3.68 | |
| General Dimension 8 | 2.540.15mm | 2.540.15mm | 2.54 | |
| General Dimension 9 | 8.890.15mm | 8.890.15mm | 8.87 | |
| General Dimension 10 | 6.50.15mm | 6.50.15mm | 6.53 | |
| General Dimension 11 | 3.00.1mm | 3.00.1mm | 3.05 | |
| General Dimension 12 | 1.270.10mm | 1.270.10mm | 1.27 | |
| General Dimension 13 | 6.350.15mm | 6.350.15mm | 6.35 | |
| Electrical Performance | Rated Voltage | 125V | 125V | |
| Rated Current | 1.5A | 1.5A | ||
| Contact Resistance | <0.03 | <0.03 | ||
| Insulation Resistance | >100 M (DC500V, 1min) | >100 M (DC500V, 1min) | ||
| Withstand Voltage | AC500V (1min) | AC500V (1min) | ||
| Reliability | Insertion Force | 330N | 330N | 12.5N (Average) |
| Extraction Force | 330N | 330N | 10.2N (Average) | |
| Insertion/Extraction Life | 750 cycles (8-10 times/min, no load) | 750 cycles (8-10 times/min, no load) | ||
| Heat Resistance | Test after 48h at 852, then 30 min in normal environment | Test after 48h at 852, then 30 min in normal environment | ||
| Solder Heat Resistance | 230, 5S | 230, 5S | ||
| Salt Mist | 8 hours (35, 5%, PH6.57.2) | 8 hours (35, 5%, PH6.57.2) | ||
| Operating Temperature | -4070 | -4070 | ||
| Storage Temperature & Humidity | Temp: -5~30; RH: 20%~75% | Temp: -5~30; RH: 20%~75% | ||
| General Specification | Current Rating | 1.5A DC / Contact, 20mA DC for LED signals | ||
| Voltage Rating | 125V AC / Contact, 2.0 volts DC for LED signals | |||
| Operating Environment | Standard Temperature | -20+70 | ||
| Industrial Temperature | -40+85 (According to customer request) | |||
| Humidity | 2070% | |||
| Storage Environment | Temperature | -40 to +85 | ||
| Humidity | 20%70% | |||
| Electrical Efficiency | Withstand Voltage | 500V (AC 50/60Hz RMS) for 1 minute, Leakage current 0.5mA MAX. | ||
| Insulation Resistance | 100 M MIN. (Using a 500 volts DC insulation resistance meter) | |||
| Contact Resistance | 30 M MIN. (measurement across a pair of mated contacts, 20mV, 100mA max) | |||
| Mechanical Efficiency | Insertion/Extraction Force | Insertion force below 20N, extraction force below 20N (rate of 20-30 times/minute) | ||
| Terminal Strength | Withstand a force of 1-4N for 10 seconds. | |||
| Durability / Lifetest | 750 cycles of insertion and extraction (rate of 20 to 30 cycles per minutes) | Contact resistance: 30m MIN. | ||
| Solderability / Resistance to soldering heat test | Temperature of solder | 2603 | Diptime: 51 seconds. | |
| Performance | Housing shall not be transmutation, contact shall not be pull out from housing. Comply with Electrical efficiency and Mechanical efficiency. | |||
| Environment Test | Cold Test | Subjected to -252 for 96 hours, then 30 minutes in room ambient. | ||
| Heat Test | Subjected to 702 for 96 hours, then 30 minutes in room ambient. | |||
| Humidity Test | Subjected to 402 and 90% to 95% RH for 96 hours, then 30 minutes in room ambient. | |||
| Salt Mist Test | 352, 5% salt water, 8 hours. | Appearance shall not be extremely rust. |
2409271733_RCH-RC00107_C7423186.pdf
Related Products
network connector RCH RC00110 featuring plastic seat and phosphor copper pin for durable electronic devices
Through Hole Modular/Ethernet Connector Jacks RoHS
NETWORK CONNECTOR RCH RC00120 Offering Electrical Performance with Phosphor Copper Pins and PA46 Material
Jack Modular Connector Through Hole
Network connector RCH RC00102 designed for electrical connections in various electronic applications
RJ45 Jack Unshielded 1 Through Hole Non-LED Through Hole Modular/Ethernet Connector Jacks RoHS
NETWORK CONNECTOR RCH RC00124 Featuring RJ45 RJ11 Socket PA46 Black Housing and Phosphor Copper Pins
Through Hole Modular/Ethernet Connector Jacks RoHS
Industrial fan RCH RC00417 designed to provide consistent airflow and quiet operation in industrial
Jack Modular Connector RJ45 Through Hole, Right Angle Unshielded
Internal RJ45 connector with spring loaded mechanism and LED indicators yellow housing RCH RC02515
Jack Modular Connector RJ45 Through Hole, Right Angle Unshielded
Network Socket RJ45 Connector with LED Lights and Durable Phosphor Bronze Contacts Model RCH RC00116
Jack Modular Connector RJ45 Through Hole Unshielded
Durable network connector series featuring RCH RC00129 model with RJ45 RJ11 sockets and electrical performance
Through Hole Modular/Ethernet Connector Jacks RoHS
electronic network connector RCH RC00111 featuring PA46 black housing and phosphor copper pin design
RJ45 Jack Unshielded 1 Through Hole Non-LED Through Hole Modular/Ethernet Connector Jacks RoHS
Network Connector RCH RC00130 Featuring 180 Degree Angle and Green Yellow LED for Electronic Devices
Jack Modular Connector Through Hole
Send RFQ
Stock:
MOQ: