Network Connector RCH RC00130 Featuring 180 Degree Angle and Green Yellow LED for Electronic Devices
Manufacturer:
RCH
Description:
Jack Modular Connector Through Hole
Category:
Modular/Ethernet Connector Jacks/Modular/Ethernet Connector Jacks
Specifications
Connector Type:
RJ45插座
PoE:
不带PoE
Shielding:
有屏蔽
Number Of Ports:
1
Mounting Type:
弯插
LED:
带LED
Mfr. Part #:
RC00130
Package:
Through Hole
Model Number:
RC00130
Introduction
Product Overview
This specification applies to Network Connectors designed for electronic products. These connectors offer reliable electrical performance with specified voltage and current ratings, suitable for various electronic applications. They are constructed with durable materials and undergo rigorous testing to ensure performance and longevity.
Product Attributes
- Brand: Wenzhou Ruichuan Electronics Co., Ltd.
- Product Series: RJ45/RJ11 Connector Series
- Model Type: NETWORK CONNECTOR
- Version: AO
- Plastic Seat Material: PA46 (Black), with recycled material 15%
- Pin Material: Phosphor Copper (=0.46mm)
- LED Color: Green-Yellow (Resin/FE)
- Shield Shell Material: Brass (Nickel Plated 30-50", Salt Fog 24H)
Technical Specifications
| Category | Parameter Name | Required Value | Manufacturer Specification Value | Manufacturer Test Value | Test Condition | Judgment Standard |
|---|---|---|---|---|---|---|
| Basic Specification | Hole Count | 1 | 1 | - | - | - |
| Angle | 180 | 180 | - | - | - | |
| Material | Plastic Seat | PA46 (Black) 15% recycled material | PA46 (Black) 15% recycled material | - | - | - |
| Round Pin | Phosphor Copper =0.46mm (Au=FU") Salt Fog 8H | Phosphor Copper =0.46mm (Au=FU") Salt Fog 8H | - | - | - | |
| LED (Light) | Green-Yellow (Resin/FE) Salt Fog 8H | Green-Yellow (Resin/FE) Salt Fog 8H | - | - | - | |
| Shield Shell | Brass (Nickel Plated 30-50" Salt Fog 24H) | Brass (Nickel Plated 30-50" Salt Fog 24H) | - | - | - | |
| Structural Dimensions | Key Dimension 1 | 16.650.15mm | 16.650.15mm | 16.61 | - | - |
| Key Dimension 2 | 15.90.15mm | 15.90.15mm | 15.91 | - | - | |
| Key Dimension 3 | 11.430.15mm | 11.430.15mm | 11.34 | - | - | |
| Key Dimension 4 | 16.450.15mm | 16.450.15mm | 16.45 | - | - | |
| Key Dimension 5 | 3.60.25mm | 3.60.25mm | 3.25 | - | - | |
| Normal Dimension 6 | 2.540.15mm | 2.540.15mm | 2.57 | - | - | |
| Normal Dimension 7 | 8.890.15mm | 8.890.15mm | 8.87 | - | - | |
| Normal Dimension 8 | 3.80.15mm | 3.80.15mm | 3.8 | - | - | |
| Normal Dimension 9 | 4.060.15mm | 4.060.15mm | 4.05 | - | - | |
| Normal Dimension 10 | 15.70.15mm | 15.70.15mm | 15.71 | - | - | |
| Normal Dimension 11 | 2.00.1mm | 2.00.1mm | 2.01 | - | - | |
| Electrical Performance | Rated Voltage | 125V | 125V | - | Socket operates normally at rated voltage, no obvious temperature rise. | - |
| Rated Current | 1.5A | 1.5A | - | Socket operates normally at rated current, no obvious temperature rise. | - | |
| Contact Resistance | <0.03 | <0.03 | - | Maximum 0.03 | - | |
| Insulation Resistance | >100 M (DC500V, 1min) | >100 M (DC500V, 1min) | - | Minimum 100M | - | |
| Withstand Voltage | AC 500V (1min) | AC 500V (1min) | - | No dielectric breakdown. | - | |
| Reliability | Insertion Force | 330N | 330N | Product Average: 12.5N | Frequency of 12.5mm/min, uniform speed, with matching plug. | Judgment Standard: 330N |
| Extraction Force | 330N | 330N | Product Average: 10.2N | Frequency of 12.5mm/min, uniform speed, with matching plug. | Judgment Standard: 330N | |
| Plug-unplug Lifespan | 750 cycles | 750 cycles | - | Under no-load conditions, 8-10 times per minute. | 1. Insertion and extraction force: 330N. 2. Contact resistance: <0.03. | |
| Heat Resistance | Test after 48 hours in 852 environment, then 30 minutes in normal environment. | Test after 48 hours in 852 environment, then 30 minutes in normal environment. | - | - | 1. Contact resistance <0.03. 2. Insulation resistance >100M. 3. No signs of mechanical or electrical damage. | |
| Soldering Temperature Resistance | 230, 5S | 230, 5S | - | - | 1. Plastic base should not deform, terminals should not detach after test. 2. Mechanical and electrical characteristics should be met. | |
| Salt Spray | 8 hours (35, 5%, PH6.57.2) | 8 hours (35, 5%, PH6.57.2) | - | - | 1. No obvious signs of rust on appearance. | |
| Operating Temperature | -4070 | -4070 | - | - | 1. No obvious damage to the appearance of the socket within the required temperature range. | |
| Storage Temperature and Humidity | a. Temperature: -5~30; b. Relative Humidity: 20%~75% | a. Temperature: -5~30; b. Relative Humidity: 20%~75% | - | - | 1. Contact resistance <0.03. 2. Insulation resistance >100M. 3. No signs of mechanical or electrical damage. | |
| Storage Period | 0.8 years | 0.8 years | - | Stored under clean, ventilated, non-corrosive gas, partition, off-ground conditions. | - | |
| General Specification | Current Rating | 1.5A DC / Contact, 20mA DC for LED signals | - | - | - | - |
| Voltage Rating | 125V AC / Contact, 2.0 volts DC for LED signals | - | - | - | - | |
| Operating Environment (Standard Temperature) | -20+70 | - | - | - | - | |
| Electrical Efficiency | Withstand Voltage | 500V (AC 50/60Hz RMS) for one minute, Leakage current 0.5mA MAX. | - | - | Between mutually insulated pin contacts. No dielectric breakdown shall occur. | - |
| Insulation Resistance | 100 M MIN. | - | - | Using a 500 volts DC insulation resistance meter between mutually insulated terminals or metallic parts. | - | |
| Mechanical Efficiency | Insertion Force | Below 20N | - | - | Insertion and extraction with matching plug at a rate of 20-30 times/minute, averagely (remove lock part). | - |
| Extraction Force | Below 20N | - | - | Insertion and extraction with matching plug at a rate of 20-30 times/minute, averagely (remove lock part). | - | |
| Durability | Lifetest | 750 cycles | - | - | 750 cycles of insertion and extraction with mated plug, at a rate of 20 to 30 cycles per minutes. | Product will not be destroyed. Contact resistance: 30m MIN. |
| Solderability | Resistance to soldering heat test | Temperature of solder: 2603. Dip time: 51 seconds. | - | - | Terminals dipped in solder. | Jack's appearance: housing shall not be transmutation, contact shall not be pull out from housing. Shall comply with Electrical efficiency and Mechanical efficiency. |
| Environment Test | Cold Test | -252 for 96 hours, then 30 minutes in ambient conditions. | - | - | - | - |
| Heat Test | 702 for 96 hours, then 30 minutes in ambient conditions. | - | - | - | - | |
| Humidity Test | 402 and 90%-95% RH for 96 hours, then 30 minutes in ambient conditions. | - | - | - | - | |
| Temperature Cycling Test | Conditions as shown below, then 30 minutes in ambient condition. Temperature of solder: 2453. Time of dip: 30.5 seconds. Length of dip: 2.0 mm. | - | - | - | - | |
| Salt Mist Test | 8 hours (352, 51% salt water concentration) | - | - | - | - | Appearance shall not be extremely rust. |
2410121256_RCH-RC00130_C7423208.pdf
Related Products
network connector RCH RC00110 featuring plastic seat and phosphor copper pin for durable electronic devices
Through Hole Modular/Ethernet Connector Jacks RoHS
NETWORK CONNECTOR RCH RC00120 Offering Electrical Performance with Phosphor Copper Pins and PA46 Material
Jack Modular Connector Through Hole
Network connector RCH RC00102 designed for electrical connections in various electronic applications
RJ45 Jack Unshielded 1 Through Hole Non-LED Through Hole Modular/Ethernet Connector Jacks RoHS
NETWORK CONNECTOR RCH RC00124 Featuring RJ45 RJ11 Socket PA46 Black Housing and Phosphor Copper Pins
Through Hole Modular/Ethernet Connector Jacks RoHS
Industrial fan RCH RC00417 designed to provide consistent airflow and quiet operation in industrial
Jack Modular Connector RJ45 Through Hole, Right Angle Unshielded
Durable network connector RCH RC00107 with 10 millimeter key dimension and gold plated pin material
RJ45 Jack Unshielded 1 Through Hole Through Hole Modular/Ethernet Connector Jacks RoHS
Internal RJ45 connector with spring loaded mechanism and LED indicators yellow housing RCH RC02515
Jack Modular Connector RJ45 Through Hole, Right Angle Unshielded
Network Socket RJ45 Connector with LED Lights and Durable Phosphor Bronze Contacts Model RCH RC00116
Jack Modular Connector RJ45 Through Hole Unshielded
Durable network connector series featuring RCH RC00129 model with RJ45 RJ11 sockets and electrical performance
Through Hole Modular/Ethernet Connector Jacks RoHS
electronic network connector RCH RC00111 featuring PA46 black housing and phosphor copper pin design
RJ45 Jack Unshielded 1 Through Hole Non-LED Through Hole Modular/Ethernet Connector Jacks RoHS
Send RFQ
Stock:
MOQ:
