NETWORK CONNECTOR RCH RC00120 Offering Electrical Performance with Phosphor Copper Pins and PA46 Material
Manufacturer:
RCH
Description:
Jack Modular Connector Through Hole
Category:
Modular/Ethernet Connector Jacks/Modular/Ethernet Connector Jacks
Specifications
LED:
不带LED
Mfr. Part #:
RC00120
Package:
Through Hole
Model Number:
RC00120
Introduction
Product Overview
This specification applies to NETWORK CONNECTORS used in electronic products. The product is designed for electrical connectivity, offering reliable performance across various environmental conditions. It is suitable for applications requiring stable electrical characteristics and mechanical durability.
Product Attributes
- Brand: Wenzhou Ruichuan Electronics Co., Ltd.
- Product Series: RJ45/RJ11 Connector Series
- Model Type: NETWORK CONNECTOR
- Version: AO
- Origin: China
- Material (Seat): PA46 (Black)
- Material (Pin): Phosphor Copper =0.46mm (Au=FU")
- Material (Shield Shell): Brass (Nickel Plated 30-50U")
- Material (Back Cover): PA46 (Black)
Technical Specifications
| Category | Parameter Name | Required Value | Manufacturer Specification Value | Manufacturer Test Value | Test Condition | Performance/Judgment Standard |
|---|---|---|---|---|---|---|
| Basic Specification | Number of Holes | 1 | 1 | - | - | - |
| Angle | 180 | 180 | - | - | - | |
| Key Dimensions | Dimension 1 | 16.650.15mm | 16.650.15mm | 16.63 | - | - |
| Dimension 2 | 15.90.15mm | 15.90.15mm | 15.89 | - | - | |
| Dimension 3 | 11.430.15mm | 11.430.15mm | 11.38 | - | - | |
| Dimension 4 | 16.450.15mm | 16.450.15mm | 16.45 | - | - | |
| Dimension 5 | 3.20.25mm | 3.20.25mm | 3.23 | - | - | |
| Normal Dimensions | Dimension 6 | 2.540.15mm | 2.540.15mm | 2.56 | - | - |
| Dimension 7 | 8.890.15mm | 8.890.15mm | 8.89 | - | - | |
| Dimension 8 | 2.20.15mm | 2.20.15mm | 2.21 | - | - | |
| Dimension 9 | 3.80.15mm | 3.80.15mm | 3.79 | - | - | |
| Dimension 10 | 15.70.15mm | 15.70.15mm | 15.69 | - | - | |
| Dimension 11 | 1.60.1mm | 1.60.1mm | 1.63 | - | - | |
| Electrical Performance | Rated Voltage | 125V | 125V | - | At 125V rated voltage | Normal operation, no obvious heating. |
| Rated Current | 1.5A | 1.5A | - | At 1.5A rated current | Normal operation, no obvious heating. | |
| Contact Resistance | <0.03 | <0.03 | - | - | Maximum 0.03 | |
| Insulation Resistance | >100 M (DC500V, 1min) | >100 M (DC500V, 1min) | - | - | Minimum 100M | |
| Withstand Voltage | AC500V (1min) | AC500V (1min) | - | - | No dielectric breakdown. | |
| Reliability | Insertion Force | 330N | 330N (at 12.5mm/min, uniform speed, with matching plug) | Product Average: 12.5N | - | Judgment Standard: 330N |
| Extraction Force | 330N | 330N (at 12.5mm/min, uniform speed, with matching plug) | Product Average: 10.2N | - | Judgment Standard: 330N | |
| Plug-unplug Life | 750 cycles (8-10 times/min, no load) | 750 cycles (8-10 times/min, no load) | - | - | 1. Insertion/Extraction Force: 3~30N. 2. Contact Resistance: <0.03. | |
| Heat Resistance | Test after 48 hours in 852 environment, then 30 minutes in normal environment. | Test after 48 hours in 852 environment, then 30 minutes in normal environment. | - | - | 1. Contact Resistance: <0.03. 2. Insulation Resistance: >100M. 3. No signs of mechanical or electrical damage. | |
| Solder Heat Resistance | 230, 5S | 230, 5S | - | - | 1. Plastic seat should not deform after test, terminals should not be loose. 2. Mechanical and electrical characteristics should be met. | |
| Salt Spray | 8 hours (35, 5%, PH6.57.2) | 8 hours (35, 5%, PH6.57.2) | - | - | 1. No obvious rust on appearance. | |
| Operating Temperature | -4070 | -4070 | - | - | 1. No obvious damage to the appearance of the socket within the required temperature range. | |
| Storage Temperature & Humidity | a. Temperature: -5~30; b. Relative Humidity: 20%~75% | a. Temperature: -5~30; b. Relative Humidity: 20%~75% | - | - | 1. Contact Resistance: <0.03. 2. Insulation Resistance: >100M. 3. No signs of mechanical or electrical damage. | |
| General Specification | Current Rating | 1.5A DC / Contact, 20mA DC for LED signals | - | - | - | - |
| General Specification | Voltage Rating | 125V AC / Contact, 2.0 volts DC for LED signals | - | - | - | - |
| Operating Environment | Standard Temperature | -20+70 | - | - | - | - |
| Operating Environment | Industrial Temperature | -40+85 (According to customer request) | - | - | - | - |
| Operating Environment | Humidity | 20%70% | - | - | - | - |
| Storage Environment | Temperature | -40 to +85 | - | - | - | - |
| Storage Environment | Humidity | 20%70% | - | - | - | - |
| Test Environment | Temperature | +20+30 | - | - | - | - |
| Test Environment | Humidity | 25%65% | - | - | - | - |
| Test Environment | Atmospheric Pressure | 86-106KPA | - | - | - | - |
| Electrical Efficiency | Withstand Voltage | 500V (AC 50/60Hz RMS) for one minute, Leakage current 0.5mA MAX. | - | - | Between mutually insulated pin contacts | No dielectric breakdown shall occur. |
| Electrical Efficiency | Insulation Resistance | 100 M MIN. | - | - | Using a 500 volts DC insulation resistance meter between mutually insulated terminals or metallic parts | - |
| Electrical Efficiency | Contact Resistance | 30 M MIN. | - | - | Across a pair of mated contacts (20mV, 100mA max), for AC frequency below 2KHz. | - |
| Mechanical Efficiency | Insertion Force | Below 20N | - | - | With the rate of 20-30 times/minute, averagely (remove lock part) | Extraction force below 20N. |
| Mechanical Efficiency | Terminal Strength | Withstand a force of 1-4N for 10 seconds. | - | - | - | Without loosing and breakdown, but deformation of terminal is accepted. |
| Durability | Life Test | 750 cycles (20 to 30 cycles per minutes) | - | - | Insertion and extraction with mated plug | The jack will not be destroyed. Contact resistance: 30m MIN. |
| Solderability | Resistance to soldering heat test | Temperature of solder: 2603. Dip time: 51 seconds. | - | - | Terminal dipped in solder | Housing shall not be transmutation, contact shall not be pull out from housing. Shall comply with Electrical efficiency and Mechanical efficiency paragraphs. |
| Environment Test | Cold Test | -252 for 96 hours, then 30 minutes in room ambient conditions. | - | - | - | - |
| Environment Test | Heat Test | 702 for 96 hours, then 30 minutes in room ambient conditions. | - | - | - | - |
| Environment Test | Humidity Test | 402 and 90% to 95% relative humidity for 96 hours, then 30 minutes in room ambient conditions. | - | - | - | - |
| Environment Test | Temperature Cycling Test | -40 to +85 (Cycles as specified), then 30 minutes in room ambient conditions. | - | - | - | - |
| Salt Mist Test | Test Condition | 352, 5%1% salt water concentration, 8 hours. | - | - | - | Appearance shall not be extremely rust. |
2409271733_RCH-RC00120_C7423211.pdf
Related Products
network connector RCH RC00110 featuring plastic seat and phosphor copper pin for durable electronic devices
Through Hole Modular/Ethernet Connector Jacks RoHS
Network connector RCH RC00102 designed for electrical connections in various electronic applications
RJ45 Jack Unshielded 1 Through Hole Non-LED Through Hole Modular/Ethernet Connector Jacks RoHS
NETWORK CONNECTOR RCH RC00124 Featuring RJ45 RJ11 Socket PA46 Black Housing and Phosphor Copper Pins
Through Hole Modular/Ethernet Connector Jacks RoHS
Industrial fan RCH RC00417 designed to provide consistent airflow and quiet operation in industrial
Jack Modular Connector RJ45 Through Hole, Right Angle Unshielded
Durable network connector RCH RC00107 with 10 millimeter key dimension and gold plated pin material
RJ45 Jack Unshielded 1 Through Hole Through Hole Modular/Ethernet Connector Jacks RoHS
Internal RJ45 connector with spring loaded mechanism and LED indicators yellow housing RCH RC02515
Jack Modular Connector RJ45 Through Hole, Right Angle Unshielded
Network Socket RJ45 Connector with LED Lights and Durable Phosphor Bronze Contacts Model RCH RC00116
Jack Modular Connector RJ45 Through Hole Unshielded
Durable network connector series featuring RCH RC00129 model with RJ45 RJ11 sockets and electrical performance
Through Hole Modular/Ethernet Connector Jacks RoHS
electronic network connector RCH RC00111 featuring PA46 black housing and phosphor copper pin design
RJ45 Jack Unshielded 1 Through Hole Non-LED Through Hole Modular/Ethernet Connector Jacks RoHS
Network Connector RCH RC00130 Featuring 180 Degree Angle and Green Yellow LED for Electronic Devices
Jack Modular Connector Through Hole
Send RFQ
Stock:
MOQ:
