electronic network connector RCH RC00111 featuring PA46 black housing and phosphor copper pin design
Manufacturer:
RCH
Description:
RJ45 Jack Unshielded 1 Through Hole Non-LED Through Hole Modular/Ethernet Connector Jacks RoHS
Category:
Modular/Ethernet Connector Jacks/Modular/Ethernet Connector Jacks
Specifications
Connector Type:
RJ45插座
Shielding:
无屏蔽
PoE:
不带PoE
Number Of Ports:
1
Mounting Type:
直插
LED:
不带LED
Mfr. Part #:
RC00111
Package:
Through Hole
Model Number:
RC00111
Introduction
Product Overview
This specification applies to NETWORK CONNECTORS designed for use in electronic products. These connectors are engineered to meet rigorous electrical, mechanical, and environmental standards, ensuring reliable performance in various applications. They are suitable for general electronic products and are manufactured by Wenzhou Ruichuan Electronics Co., Ltd.
Product Attributes
- Brand: Wenzhou Ruichuan Electronics Co., Ltd.
- Product Series: RJ45/RJ11 Connector Series
- Model Type: NETWORK CONNECTOR
- Version: AO
- Material (Housing): PA46 (Black)
- Material (Pin): Phosphor Copper (=0.46mm, Au=FU")
Technical Specifications
| Category | Parameter | Requirement Value | Manufacturer Specification | Manufacturer Test Value |
|---|---|---|---|---|
| Basic Specification | Number of Holes | 1 | 1 | - |
| Angle | 180 | 180 | - | |
| Material | Housing | PA46 (Black) | PA46 (Black) | - |
| Pin | Phosphor Copper =0.46mm (Au=FU") | Phosphor Copper =0.46mm (Au=FU") | - | |
| Structural Dimensions | Key Dimension 1 | 15.40.15mm | 15.40.15mm | 15.43 |
| Key Dimension 2 | 16.50.15mm | 16.50.15mm | 16.53 | |
| Key Dimension 3 | 11.430.15mm | 11.430.15mm | 11.43 | |
| Key Dimension 4 | 16.000.5mm | 16.000.5mm | 15.89 | |
| Key Dimension 5 | 16.30.15mm | 16.30.15mm | 16.26 | |
| Key Dimension 6 | 3.10.2mm | 3.10.2mm | 3.21 | |
| Normal Dimension 7 | 2.540.15mm | 2.540.15mm | 2.54 | |
| Normal Dimension 8 | 8.890.15mm | 8.890.15mm | 8.89 | |
| Normal Dimension 9 | 6.50.15mm | 6.50.15mm | 6.53 | |
| Normal Dimension 10 | 3.00.1mm | 3.00.1mm | 3.05 | |
| Normal Dimension 11 | 1.270.10mm | 1.270.10mm | 1.27 | |
| Normal Dimension 12 | 8.890.15mm | 8.890.15mm | 8.89 | |
| Electrical Performance | Rated Voltage | 125V | 125V | - |
| Rated Current | 1.5A | 1.5A | - | |
| Contact Resistance | <0.03 | <0.03 | - | |
| Insulation Resistance | >100 M (DC500V,1min) | >100 M (DC500V,1min) | - | |
| Withstand Voltage | AC500V(1min) | AC500V(1min) | - | |
| Reliability | Insertion Force | 330N | 330N | Product Average: 12.5N |
| Extraction Force | 330N | 330N | Product Average: 10.2N | |
| Plug-unplug Lifespan | 750 cycles (at a rate of 8-10 times per minute under no-load conditions) | |||
| Heat Resistance | Tested after 48 hours in an environment of 852, then 30 minutes in a normal environment. | |||
| Solder Heat Resistance | 230, 5S | 230, 5S | - | |
| Salt Mist | 8 hours (35, 5%, PH6.57.2) | 8 hours (35, 5%, PH6.57.2) | - | |
| Operating Temperature | -4070 | -4070 | - | |
| Storage Temperature & Humidity | a. Temperature: -5~30; b. Relative Humidity: 20%~75% | |||
| Storage Period | 0.8 years | 0.8 years | Stored under clean, ventilated, non-corrosive gas, partition, and elevated conditions. | |
| General Specification | Current Rating | 1.5A DC / Contact, 20mA DC for LED signals | - | - |
| General Specification | Voltage Rating | 125V AC / Contact, 2.0 volts DC for LED signals | - | - |
| Operating Environment | Standard Temperature | -20+70 | - | - |
| Operating Environment | Industrial Temperature | -40+85 (According to customer request) | - | - |
| Operating Environment | Humidity | 20%70% | - | - |
| Storage Environment | Temperature | -40 to +85 | - | - |
| Storage Environment | Humidity | 20%70% | - | - |
| Test Environment | Temperature | +20+30 | - | - |
| Test Environment | Humidity | 25%65% | - | - |
| Test Environment | Atmospheric Pressure | 86-106KPA | - | - |
| Electrical Characteristics | Withstand Voltage | 500V (AC 50/60Hz RMS) for 1 minute, Leakage current 0.5mA MAX. | - | - |
| Electrical Characteristics | Insulation Resistance | 100 M MIN. (Using a 500 volts DC insulation resistance meter) | - | - |
| Electrical Characteristics | Contact Resistance | 30 M MIN. (Measurement across a pair of mated contacts, 20mV, 100mA max) | - | - |
| Mechanical Characteristics | Insertion Force | Below 20N | - | - |
| Mechanical Characteristics | Extraction Force | Below 20N | - | - |
| Mechanical Characteristics | Terminal Strength | Withstand a force of 1-4N for 10 seconds | - | - |
| Durability | Lifetest | 750 cycles (at a rate of 20 to 30 cycles per minute) | - | Contact resistance: 30m MIN. |
| Solderability | Resistance to soldering heat test | Temperature of solder: 2603. Dip time: 51 seconds. | - | Housing shall not be transmutation, contact shall not be pull out from housing. Shall comply with Electrical efficiency and Mechanical efficiency. |
| Environment Test | Cold Test | Subjected to -252 for 96 hours, then conditioned at room ambient for 30 minutes. | - | - |
| Environment Test | Heat Test | Subjected to 702 for 96 hours, then conditioned at room ambient for 30 minutes. | - | - |
| Environment Test | Humidity Test | Subjected to 402 and 90% to 95% relative humidity for 96 hours, then conditioned at room ambient for 30 minutes. | - | - |
| Environment Test | Temperature Cycling Test | Subjected to conditions as shown below, then conditioned at room ambient for 30 minutes: Solder temp: 2453N, Dip time: 30.5s, Dip length: 2.0 mm. | - | - |
| Salt Mist Test | Testing Bath Temperature | 352 | - | - |
| Salt Mist Test | Salt Water Concentration | 51% by weight | - | - |
| Salt Mist Test | Testing Time | 8 hours | - | Appearance shall not be extremely rust. |
Testing Conditions: Unless otherwise specified, tests are carried out at a temperature of 5C-35C, relative humidity of 45%-85%, and atmospheric pressure of 86kPa-106kPa. For judgment, tests are carried out at a temperature of 202C, relative humidity of 60%-70%, and atmospheric pressure of 86kPa-106kPa.
Amendment: Any amendments to this specification require mutual consultation and agreement between the manufacturer and customer.
Language Preference: This specification is provided in Chinese & English; Chinese is preferential in case of interpretation doubt.
2409271733_RCH-RC00111_C7423188.pdf
Related Products
network connector RCH RC00110 featuring plastic seat and phosphor copper pin for durable electronic devices
Through Hole Modular/Ethernet Connector Jacks RoHS
NETWORK CONNECTOR RCH RC00120 Offering Electrical Performance with Phosphor Copper Pins and PA46 Material
Jack Modular Connector Through Hole
Network connector RCH RC00102 designed for electrical connections in various electronic applications
RJ45 Jack Unshielded 1 Through Hole Non-LED Through Hole Modular/Ethernet Connector Jacks RoHS
NETWORK CONNECTOR RCH RC00124 Featuring RJ45 RJ11 Socket PA46 Black Housing and Phosphor Copper Pins
Through Hole Modular/Ethernet Connector Jacks RoHS
Industrial fan RCH RC00417 designed to provide consistent airflow and quiet operation in industrial
Jack Modular Connector RJ45 Through Hole, Right Angle Unshielded
Durable network connector RCH RC00107 with 10 millimeter key dimension and gold plated pin material
RJ45 Jack Unshielded 1 Through Hole Through Hole Modular/Ethernet Connector Jacks RoHS
Internal RJ45 connector with spring loaded mechanism and LED indicators yellow housing RCH RC02515
Jack Modular Connector RJ45 Through Hole, Right Angle Unshielded
Network Socket RJ45 Connector with LED Lights and Durable Phosphor Bronze Contacts Model RCH RC00116
Jack Modular Connector RJ45 Through Hole Unshielded
Durable network connector series featuring RCH RC00129 model with RJ45 RJ11 sockets and electrical performance
Through Hole Modular/Ethernet Connector Jacks RoHS
Network Connector RCH RC00130 Featuring 180 Degree Angle and Green Yellow LED for Electronic Devices
Jack Modular Connector Through Hole
Send RFQ
Stock:
MOQ:
