High reliability network connector RCH RC00119 with gold plated phosphor copper pins and plastic seat
Manufacturer:
RCH
Description:
Jack Modular Connector Through Hole
Category:
Modular/Ethernet Connector Jacks/Modular/Ethernet Connector Jacks
Specifications
LED:
不带LED
Mfr. Part #:
RC00119
Package:
Through Hole
Model Number:
RC00119
Introduction
NETWORK CONNECTOR
Product Overview
This specification applies to NETWORK CONNECTORS used in electronic products. These connectors are designed for reliable electrical connections, featuring specific material compositions for durability and performance under various environmental and electrical conditions. They are suitable for applications requiring stable voltage and current ratings, with defined contact and insulation resistance.
Product Attributes
- Brand: Wenzhou Ruichuan Electronics Co., Ltd.
- Model Type: NETWORK CONNECTOR (RJ45/RJ11 Socket Series)
- Version: AO
- Material:
- Plastic Seat: PA46 (Black)
- Round Pin: Phosphor Copper =0.46mm (Au=FU")
- Shielding Shell: Brass (Nickel Plated 30-50U")
- Back Cover: PA46 (Black)
Technical Specifications
| Category | Parameter Name | Required Value | Manufacturer Specification Value | Manufacturer Test Value | Judgment Standard |
|---|---|---|---|---|---|
| Basic Specifications | Number of Holes | 1 | 1 | - | - |
| Angle | 180 | 180 | - | - | |
| Structural Dimensions (Key Dimensions) | 1 | 16.650.15mm | 16.650.15mm | 16.61 | - |
| 2 | 15.90.15mm | 15.90.15mm | 15.93 | - | |
| 3 | 11.430.15mm | 11.430.15mm | 11.29 | - | |
| 4 | 16.450.15mm | 16.450.15mm | 16.47 | - | |
| 5 | 3.20.25mm | 3.20.25mm | 3.23 | - | |
| Structural Dimensions (Ordinary Dimensions) | 6 | 2.540.15mm | 2.540.15mm | 2.56 | - |
| 7 | 8.890.15mm | 8.890.15mm | 8.89 | - | |
| 8 | 2.20.15mm | 2.20.15mm | 2.2 | - | |
| 9 | 3.050.15mm | 3.050.15mm | 3.04 | - | |
| 10 | 15.70.15mm | 15.70.15mm | 15.69 | - | |
| 11 | 1.60.1mm | 1.60.1mm | 1.63 | - | |
| Electrical Performance | Rated Voltage | 125V | 125V | - | Socket operates normally at 125V rated voltage without obvious heating. |
| Rated Current | 1.5A | 1.5A | - | Socket operates normally at 1.5A rated current without obvious heating. | |
| Contact Resistance | <0.03 | <0.03 | - | Maximum 0.03 | |
| Insulation Resistance | >100 M (DC500V, 1min) | >100 M (DC500V, 1min) | - | Minimum 100M | |
| Withstand Voltage | AC500V (1min) | AC500V (1min) | - | No breakdown occurs. | |
| Reliability | Insertion Force | 330N (at a frequency of 12.5mm per minute, uniform speed, with a matching plug) | 330N (at a frequency of 12.5mm per minute, uniform speed, with a matching plug) | Product average: 12.5N | Judgment Standard: 330N |
| Extraction Force | 330N (at a frequency of 12.5mm per minute, uniform speed, with a matching plug) | 330N (at a frequency of 12.5mm per minute, uniform speed, with a matching plug) | Product average: 10.2N | Judgment Standard: 330N | |
| Plug-unplug Lifespan | Operate 750 times at a speed of 8-10 times per minute under no-load conditions. | Operate 750 times at a speed of 8-10 times per minute under no-load conditions. | - | 1. Insertion and extraction force values are 330N. 2. Contact resistance is less than 0.03. | |
| Heat Resistance | Test after placing in an environment of 852 for 48 hours, then in a normal environment for 30 minutes. | Test after placing in an environment of 852 for 48 hours, then in a normal environment for 30 minutes. | - | 1. Contact resistance below 0.03 ohm. 2. Insulation resistance above 100 megohm. 3. No signs of mechanical and electrical performance damage. | |
| Resistance to Soldering Temperature | 230, 5S | 230, 5S | - | 1. After the test, the plastic base should not be deformed, and the terminals should not be detached. 2. Mechanical and electrical characteristics should be met. | |
| Salt Spray | 8 hours (35, 5%, PH6.57.2) | 8 hours (35, 5%, PH6.57.2) | - | 1. No obvious signs of rust on the appearance. | |
| Working Temperature | -4070 | -4070 | - | 1. No obvious damage to the appearance of the socket within the required temperature range. | |
| Storage Temperature and Humidity | a. Temperature: -5~30; b. Relative Humidity: 20%~75% | a. Temperature: -5~30; b. Relative Humidity: 20%~75% | - | 1. Contact resistance below 0.03 ohm. 2. Insulation resistance above 100 megohm. 3. No signs of mechanical and electrical performance damage. | |
| Storage Period | Stored under conditions of clean, ventilated, no corrosive gas, partitioned, and off the ground. 0.8 years | Stored under conditions of clean, ventilated, no corrosive gas, partitioned, and off the ground. 0.8 years | - | - | |
| Electrical Performance (from additional document) | Withstand voltage | 500V (AC 50/60Hz RMS) for one minute, Leakage current 0.5mA MAX. | - | - | No dielectric breakdown shall occur. |
| Insulation resistance | 100 M MIN. (Using a 500 volts DC insulation resistance meter) | - | - | - | |
| Contact resistance | 30 M MIN. (measured across a pair of mated contacts) | - | - | - | |
| Current Rating | 1.5A DC / Contact, 20mA DC for LED signals | - | - | - | |
| Mechanical Efficiency (from additional document) | Insertion and Extraction Force | Insertion force is below 20N, extraction force is below 20N. (rate of 20-30 times/minute) | - | - | - |
| Terminal Strength | Withstand a force of 1-4N for 10 seconds. | - | - | Without loosening and breakdown, but deformation of terminal is accepted. | |
| Durability / Lifetest (from additional document) | Lifetest | 750 cycles of insertion and extraction with mated plug, at a rate of 20 to 30 cycles per minutes. | - | - | The jack will not be destroyed. Contact resistance: 30m MIN. |
| Solderability / Resistance to soldering heat test (from additional document) | Resistance to soldering heat test | Temperature of solder: 2603. Dip time: 51 seconds. | - | - | Housing shall not be transmutation, contact shall not be pull out from housing. Shall comply with Electrical efficiency and Mechanical efficiency. |
| Environment test (from additional document) | Cold test | Subjected to temperature of -252 for 96 hours, then conditioned at room ambient for 30 minutes. | - | - | - |
| Heat test | Subjected to temperature of 702 for 96 hours, then conditioned at room ambient for 30 minutes. | - | - | - | |
| Humidity test | Subjected to temperature of 402 and relative humidity of 90% to 95% for 96 hours. Conditioned at room ambient for 30 minutes. | - | - | - | |
| Salt mist test | Testing bath at 352, salt water concentration 51%, for 8 hours. | - | - | Appearance shall not be extremely rust. |
General Specifications (from additional document)
- Standard Temperature: -20+70
- Industrial Temperature: -40+85 (According to customer request)
- Humidity: 2070%
- Storage Environment Temperature: -40 to +85
- Storage Environment Humidity: 20%70%
- Test Environment Temperature: +20+30
- Test Environment Humidity: 25%65%
- Atmospheric Pressure: 86-106KPA
Scope
This specification is applied to NETWORK CONNECTOR which is used for electric products.
Construction/
- Outline And Dimension: Outline and dimension of the jack shown be as attached assembled drawing.
- Part And Material: The parts and materials shown be in material identification sheet and certification of material.
Amendment
When the amendment of this specification comes into necessity, it shall be made by mutual consultation and agreement between manufacture and customer. The test and measurement, unless otherwise specified, shall be carried out at a temperature of 5C-35C, relative humidity of 45%-85% and atmospheric pressure of 86kPa -106kPa. However, when any doubt arises on the judgment value under it, the test and measurement shall be carried out at a temperature of 202C, relative humidity of 60%-70% and atmospheric pressure of 86kPa -106kPa. This specification is stated with Chinese & English, Chinese is preferential while doubt in interpretation.
2409271733_RCH-RC00119_C7423210.pdf
Related Products
network connector RCH RC00110 featuring plastic seat and phosphor copper pin for durable electronic devices
Through Hole Modular/Ethernet Connector Jacks RoHS
NETWORK CONNECTOR RCH RC00120 Offering Electrical Performance with Phosphor Copper Pins and PA46 Material
Jack Modular Connector Through Hole
Network connector RCH RC00102 designed for electrical connections in various electronic applications
RJ45 Jack Unshielded 1 Through Hole Non-LED Through Hole Modular/Ethernet Connector Jacks RoHS
NETWORK CONNECTOR RCH RC00124 Featuring RJ45 RJ11 Socket PA46 Black Housing and Phosphor Copper Pins
Through Hole Modular/Ethernet Connector Jacks RoHS
Industrial fan RCH RC00417 designed to provide consistent airflow and quiet operation in industrial
Jack Modular Connector RJ45 Through Hole, Right Angle Unshielded
Durable network connector RCH RC00107 with 10 millimeter key dimension and gold plated pin material
RJ45 Jack Unshielded 1 Through Hole Through Hole Modular/Ethernet Connector Jacks RoHS
Internal RJ45 connector with spring loaded mechanism and LED indicators yellow housing RCH RC02515
Jack Modular Connector RJ45 Through Hole, Right Angle Unshielded
Network Socket RJ45 Connector with LED Lights and Durable Phosphor Bronze Contacts Model RCH RC00116
Jack Modular Connector RJ45 Through Hole Unshielded
Durable network connector series featuring RCH RC00129 model with RJ45 RJ11 sockets and electrical performance
Through Hole Modular/Ethernet Connector Jacks RoHS
electronic network connector RCH RC00111 featuring PA46 black housing and phosphor copper pin design
RJ45 Jack Unshielded 1 Through Hole Non-LED Through Hole Modular/Ethernet Connector Jacks RoHS
Send RFQ
Stock:
MOQ:
