T Flash Card Connector SHETIME TFN22 S1S1 2000 A with Dielectric Strength and RoHS Compliant Material
Manufacturer:
SHETIME
Description:
Push-Push 1.85mm MicroSD Card SMD PC Card Sockets RoHS
Category:
PC Card Sockets/PC Card Sockets
Specifications
Operating Temperature:
-
Card Connection Mode:
自弹式
Rated Voltage (Max):
-
Height Above Board:
1.85mm
Supplementary Features:
-
Card Detection:
-
Connector Type:
-
Card Type:
MicroSD卡
Mfr. Part #:
TFN22-S1S1-2000-A
Package:
SMD
Model Number:
TFN22-S1S1-2000-A
Introduction
Product Overview
This product specification defines the product performance and the test methods for the T-FLASH CARD CONN., a connector designed and manufactured by Dongguan Gyueda Electronics Co., Ltd. It is used for T-FLASH CARD connections.
Product Attributes
- Brand: GYUEDA
- Origin: Taiwan (Factory), Dongguan (Factory)
- Material: Compliant with RoHS directive.
- Certifications: UL498
Technical Specifications
| Item | Requirements | Test Methods |
| 1. Confirmation of Product | Product shall be conforming to the requirements of applicable product drawing. | Visually, dimensions and functionally inspected per applicable product drawing. |
| 2. Contact resistance (Low Level) | 80 m Max. initial | Subject mated contacts assembled in housing to closed circuit of 10 mA max. at open circuit voltage of 20 mV max. |
| 3. Insulation resistance | 1000 M Min. | Measure by applying test potential between the adjacent contacts, and between the contacts and ground in the mated connector. MIL-STD-202, Method 302, Condition B (500 V DC10%). |
| 4. Dielectric Strength | Connector must withstand test potential of 500 V AC for 1 minute. Current leakage must be 1.0 mA max. | Measure by applying test potential between the adjacent contacts, and between the contacts and ground in the mated connector. MIL-STD-202, Method 301. |
| 5. Durability (Repeated Mating/Unmating) | Contact Resistance: 100 m Max. after testing | Mate and unmate connector for 5000 cycle. |
| 6. Temperature rise | 30C Max. | Carry rated current load.0.3A per contact. (UL498) |
| 7. Vibration Sinusoidal Low Frequency | No electrical discontinuity greater then 1 sec (s) shall occur. Contact resistance:100 mmax. | Subj |
2511131740_SHETIME-TFN22-S1S1-2000-A_C52750309.pdf
Related Products
SIM Memory Card Connector SHETIME SMP21-S1S1-2000-A Featuring Copper Alloy Contacts and Gold Finish
-25℃~+85℃ Push-Push 1.9mm SMD PC Card Sockets RoHS
Electrical and mechanical tested SHETIME TFC6A-N1S1-2000-A TF card connector designed for surface mounting
Push-Push 1.8mm MicroSD Card SMD PC Card Sockets RoHS
TFlash Connector SHETIME TFW11-S1F2-2000-A Featuring Nickel Underlayer and Matte Tin Solder Leg Area
Push-Push 2mm Connector and Ejector MicroSD Card (TF Card) SMD PC Card Sockets RoHS
Nano sim card socket connector SHETIME NOS11-S1F1-2000-A featuring lcp housing and gold flash plating for performance
Push-Push 1.37mm SMD PC Card Sockets RoHS
SIM Memory Card Connector SHETIME SMP11-S1S1-2000-A with Gold over Nickel Contacts and LCP Housing
-25℃~+85℃ Push-Push 1.9mm SMD PC Card Sockets RoHS
MICOR SIM PUSN Card Holder 6 plus 1 PCD SHETIME MIS22-S1F1-2000-A SIM Memory Card Connector with LCP Housing
-25℃~+85℃ Push-Push 1.35mm MicroSIM Card SMD PC Card Sockets RoHS
Electrical connector SHETIME TFW13-S1F1-2000-A with RoHS directive compliance and tested performance
Push-Push 2mm Connector and Ejector MicroSD Card (TF Card) SMD PC Card Sockets RoHS
nano sim card socket connector SHETIME NOS21-S1F1-2000-A suitable for 3000 mating cycles applications
Push-Push SMD PC Card Sockets RoHS
TF card connector SHETIME TFW13-N1S1-2000-A with tested dielectric strength and UL498 certification
Push-Push 1.8mm MicroSD Card SMD PC Card Sockets RoHS
T-Flash Connector SHETIME TFW11-N1S1-2000-A External Welding Card Holder with UL498 and RoHS Compliance
Push-Push 1.8mm MicroSD Card SMD PC Card Sockets RoHS
Send RFQ
Stock:
MOQ:
